@article { author = {M. Hassan, Shamil and T.Al-shakarchi, Saad and M.Jameel Ali, Sabah}, title = {Dynamic Analysis of a Generated Stresses in a Draw bar}, journal = {Al-Rafidain Engineering Journal (AREJ)}, volume = {20}, number = {3}, pages = {1-6}, year = {2012}, publisher = {College of Engineering, University of Mosul, IRAQ}, issn = {1813-0526}, eissn = {2220-1270}, doi = {10.33899/rengj.2012.50465}, abstract = {Abstract The stress analysis in the draw bar has been analyzed fully during the tillage operation in two different soil types. The study was done in a series of two stages : The first was done, in the Mechanical Engineering Department, University of Mosul in order to obtain the analysis of material to be used in this study, the mechanical and physical properties of the draw bar metals. The analysis of the soils to be used was obtained in the Geotechnical laboratory in the Civil Engineering dept. later the dimensional Analysis of the draw-bar was fixed, then the stress- analysis generated at varies points on the draw-bar was obtained using the finite element analysis using the ANSYS V5.4 program. during the application of the draw-bar in a similar condition. Special cases, were taken in consideration such as the stresses in X, Y co-ordinates, in addition to the principal stresses. During the second phase of this study, the stresses at a special locations were measured using a number of electrical resistance strain gauges fixed on the draw-bar while the Tractor was driven on two different soils at varies depth (30cm, 35cm, 40cm). Keywords : drawbar, dynamic analysis, complex stresses استلم في 11 / 4 / 2010}, keywords = {KEYWORDS,dynamic analysis,complex stresses}, title_ar = {التحليل الديناميكي للاجهادات المتولدة في ساق المحراث}, abstract_ar = {الخلاصةتم دراسة الاجهادت المتولدة على ساق المحراث أثناء عملية الحراثة في تربتين مختلفتين، حيث تمت الدراسة على مرحلتين الاولى في مختبرات الهندسة الميكانيكية - جامعة الموصل والتي تم خلالها تحديد نوع المعدن والتركيبة الكيميائية والخواص الميكانيكية لساق المحراث، وفي مختبرات الجيوتكنيك التابعة لقسم الهندسة المدنية - جامعة الموصل من اجل تحديد نوع نسجة التربة وتبين ان هناك اختلاف في النسجة الخاصة بالتربتين. ومن ثم تثبيت الابعاد والقياسات الاساسية للساق من حيث التصميم الميكانيكي بغية تحليل الاجهادات المتولدة على هيكلية الساق باستخدام تقنية العناصر المحددة من خلال تطبيق برنامج ANSYS V5.4 وبيان مدى تحمله لظروف مشابهة للظروف الحقلية التي يعمل فيها المحراث. وأخذت عدد من الحالات منها الاجهادات بمحوري (x,y) اضافة الى ايجاد الاجهاد الاعظم وكذلك نسبة الانحراف.تم في المرحلة الثانية قياس الاجهادات المتولدة عملياً في ساق المحراث من خلال تثبيت عدد من المجسات على ساق المحراث واجراء القياسات عملياً حيث اعتمد فيها عامل نوع التربة وبواقع نسجتين مختلفتين من التربة. وعامل العمق وبثلاث مستويات (30 سم، 35 سم، 40 سم) على التوالي.}, keywords_ar = {}, url = {https://rengj.mosuljournals.com/article_50465.html}, eprint = {https://rengj.mosuljournals.com/article_50465_f76e51280ec2901d6f218be29e55276f.pdf} } @article { author = {Maamoon F. Al-Kababji, Dr.}, title = {Real Time Based Fuzzy Logic Distance Protection}, journal = {Al-Rafidain Engineering Journal (AREJ)}, volume = {20}, number = {3}, pages = {1-14}, year = {2012}, publisher = {College of Engineering, University of Mosul, IRAQ}, issn = {1813-0526}, eissn = {2220-1270}, doi = {10.33899/rengj.2012.50471}, abstract = {Abstract This paper presents a new approach to real-time fault detection in power transmission systems using Fuzzy Logic (FL) based transmission line distance protection module. The proposed module uses samples of voltage and current signals to calculate line impedance, which used to construct an input-output data. Simulation studies are preformed and influence of changing system parameters such as fault resistance and fault location. Details of the design procedure and the results of performance studies with the proposed relay are given. Practical computer simulation program for monitoring the input and calculated values is built based on the Matlab 7.4- Real Time Simulink with National Instruments Data Acquisition System type (NI DAQ-6251). The results show that this approach can be used as an effective tool for high speed digital relaying, a correct detection is achieved in less than 10ms, results performance shows that the proposed algorithm is fast and accurate as compared with others used relays. Keywords: Transmission line protection, Distance relay, Fuzzy logic, and Matlab-Simulink.}, keywords = {KEYWORDS,Distance relay,Fuzzy Logic,and MATLAB,Simulink}, title_ar = {حماية المسافة باستخدام المنطق المضبب في الزمن الحقيقي}, abstract_ar = {المستلخصيقدم هذا البحث طريقة جديدة للكشف عند الخطأ بالزمن الحقيقي في نظم نقل الطاقة الكهربائية باستخدام المنطق المضبب المعتمد موديل حماية المسافة لخط النقل. استخدم النموذج المقترح قيم إشارات الفولتية والتيار لحساب ممانعة الخط والتي بدورها تستخدم لإنشاء المعلومات اللازمة لتصميم المرحلة. التحليل باستخدام الحاسبة اخذ لعدة حالات مثل تغير مقاومة العطل بالإضافة إلى موقعه. وأعطيت تفاصيل التصميم للمرحلة المقترحة.بني برنامج المحاكات العملي ذو الزمن الحقيقي بواسطة برنامج المتلاب باستخدام كارت موائمة نوع (NI DAQ-6251). أظهرت النتائج أن الموديل المقترح يمكن استخدامه كوسيلة ذات تأثير في مرحلة المسافة الرقمية السريعة جداً. ونتيجة للكشف الصحيح للأعطال في زمن اقل من 10 ملي ثانية والتي بذلك تعطي سرعة في الأداء ومرونةً ودقة مقارنتاً مع ما موجود من المرحلات.}, keywords_ar = {}, url = {https://rengj.mosuljournals.com/article_50471.html}, eprint = {https://rengj.mosuljournals.com/article_50471_314795abdbf30447bba458542c13dffb.pdf} } @article { author = {Younis Abdullah AL-ubaidy, Gada and Khalid Mahmood Khidir, Dr.}, title = { Evaluate the Performance of stochastic models in Generating Monthly Discharges for the Rivers in North of Iraq}, journal = {Al-Rafidain Engineering Journal (AREJ)}, volume = {20}, number = {3}, pages = {7-22}, year = {2012}, publisher = {College of Engineering, University of Mosul, IRAQ}, issn = {1813-0526}, eissn = {2220-1270}, doi = {10.33899/rengj.2012.50467}, abstract = {Abstract The data of monthly discharge which are available for most of the rivers in the north of Iraq have a short recorded period ,which has a great influence in the design and planning of water resources systems , where this short recorded not contain a critical and extreme flows sample of the low flow sequences. Two stochastic models , bivariate "Thomas & Fiering" model and multi-side "matalas" model were used for generating time series for(100) years for the lower Zab and Diyala river at upstream of Dokan Dam and Derbendekhan Dam using the available recorded data for the period (1962-1997) . From application of different statistical tests (Kolmogrov–Smirnov), Chi-Square (X2), Root Mean Square Error (RMSE), Mean Absolute Error (MAE, Z), found that "Matalas" model is more performance than the bivariate model, "Thomas & Fiering" generate time series for both rivers, so it can be concluded that the "Matalas" model can be proposed to be used for generating the flow series for the different rivers in the northern Iraq. Key Words: Time Serious for monthly discharge, Stochastic Models , bivariate "Thomas & Fiering" model, "Matalas" model, Statistical Tests}, keywords = {Key Words,Stochastic Models,bivariate,Matalas,Statistical Tests,Thomas}, title_ar = {تقييم أداء النماذج التصادفية المتعددة المتغيرات في توليد التصاريف الشهرية للأنهار الواقعة في شمال العراق}, abstract_ar = {المستخلص تمتد بيانات التصريف الشهرية المتوفرة لأغلب الأنهار الواقعة في شمال العراق لفترات محدودة ، تكاد تكون غير كافية لتصميم منظومات الموارد المائية وذلك لعدم احتواء هذه البيانات على قيم قصوى متطرفة وسلاسل حرجة وكذلك عينات نموذجية لسلاسل تصريف دنيا كافية لإعداد هذه التصاميم .استخدم أنموذجان تصادفيان يتمثلان بأنموذج "Thomas& Fiering " ثنائي المتغير وأنموذج Matalas المتعدد المواقع في توليد سلاسل تصادفيه للتصاريف الشهرية لنهري ديالى والزاب الأسفل لمحطتي مقدم سد دوكان وسد دربندخان على التوالي وذلك لفترة زمنية تتجاوز (100) سنة باعتماد قيم التصريف الشهرية المرصودة لكلا النهرين لفترة ست وثلاثين سنة مائية (1962-1997).بعد إجراء اختبار التوزيع الطبيعي باستخدام طريقة (Box-Cox) على البيانات الشهرية المرصودة لكلا النهرين ، تم تطبيق مجموعة من الاختبارات الإحصائية المتمثلة باختبار معدل مربع الخطأ (RMSE) واختبار معدل الخطأ المطلق (MAE) واختبار مربع كاي (χ2) واختبار ( Kolomogrov–Simirnorv) واختبار Z ، ومن ملاحظة نتائج هذه الاختبارات وكذلك مقارنة المعدلات الشهرية لقيم التصريف والانحراف المعياري للبيانات المرصودة والمولدة يتبين أن أداء أنموذج Matalas أفضل من أداء أنموذج"Thomas & Fiering " الثنائي المتغير وعليه يمكن اقتراح تعميم استخدام أنموذج Matalas " " المتعدد المواقع لتوليد التصاريف الشهرية لأي نهرين شمال العراق .الكلمات الدالة : السلاسل الزمنية للتصاريف الشهرية ، النماذج التصادفية ، انموذج Thomas& Fiering الثنائي المتغير ، انموذج Matalas ، الاختبارات الإحصائية .}, keywords_ar = {الكلمات الدالة,النماذج التصادفية,انموذج,الاختبارات الإحصائية}, url = {https://rengj.mosuljournals.com/article_50467.html}, eprint = {https://rengj.mosuljournals.com/article_50467_e423d507e8da8946554b5376515d4e56.pdf} } @article { author = {Khalid Khalil Mohammad, Dr.}, title = {Design and Fabrication of Narrow Band Infrared Detector}, journal = {Al-Rafidain Engineering Journal (AREJ)}, volume = {20}, number = {3}, pages = {15-25}, year = {2012}, publisher = {College of Engineering, University of Mosul, IRAQ}, issn = {1813-0526}, eissn = {2220-1270}, doi = {10.33899/rengj.2012.50472}, abstract = {Abstract Most of infrared detectors used in various electrical equipments have wide spectral response and usually needs front filter to prevent visible light from passing to the detector. This research is intended to study and fabricate an indium doped silicon (n) (In-Si) structure to achieve a photo detector working as narrowband infrared detector. The SCAPS program was used as a simulation tool in order to achieve the optimum structure design. Then the (In-Si) infrared detector was fabricated using vacuum evaporation deposition technique. The fabricated photodiode shows a narrowband spectral response at 940 nm. The results of the simulated and practical samples are comparable which gives a simple and cheap method for obtaining narrowband infrared detector. Keywords: silicon, infrared, photo detector.}, keywords = {KEYWORDS,Infrared,photo detector}, title_ar = {تصميم وتنفيذ كاشف للاشعة تحت الحمراء ذو استجابة طيفية ضيقة الحزمة}, abstract_ar = {الخلاصةان معظم كواشف الاشعة تحت الحمراء والمستخدمة في المعدات والاجهزة الكهربائية تكون ذات استجابة طيفية واسعة الحزمة وتمتد غالبا لتشمل الاطوال المرئية ولذا يوضع امامها مرشح ليمنع مرور هذه الاطوال الى الكاشف. في هذا البحث تمت دراسة و تصنيع بنية ثنائي ضوئي مصنوع من مادة السيليكون (n) المطعم بالانديوم للحصول على كاشف اشعة تحت الحمراء ذو عرض حزمة طيفية ضيقة. كما تم استخدام برنامج المحاكاة SCAPS لغرض الحصول على التصميم الامثل للنبيطة. ثم باستخدام تقنية الترسيب بالتبخير الفراغي تم الحصول على كاشف اشعة تحت الحمراء عمليا. ولقد اظهرت قياسات الاستجابة الطيفية للكاشف المنفذ عمليا استجابة طيفية ذات عرض حزمة ضيقة عند طول موجي 940 nm. كما واظهرت نتائج القياسات العملية ونتائج عملية المحاكاة الحاسوبية نتائج متقاربة وتم الحصول من خلالها على كاشف اشعة تحت حمراء بسيط ورخيص وذو عرض حزمة طيفية ضيقة.}, keywords_ar = {}, url = {https://rengj.mosuljournals.com/article_50472.html}, eprint = {https://rengj.mosuljournals.com/article_50472_80d25d0a068c28d690d20b4cf5faef28.pdf} } @article { author = {M. Thabit, Nasma}, title = {The Textural Effects and Heritage Continuity in Contemporary Iraqi Architectural Product}, journal = {Al-Rafidain Engineering Journal (AREJ)}, volume = {20}, number = {3}, pages = {23-52}, year = {2012}, publisher = {College of Engineering, University of Mosul, IRAQ}, issn = {1813-0526}, eissn = {2220-1270}, doi = {10.33899/rengj.2012.50470}, abstract = {Abstract The present study defines the research problem as a reformulation of a scientific aspect to study the relations between heritage and textural effects under the influence of the continuity. The studies discuss the relations of textural effects with heritage continuity. This research clarifies how strategically use the concept textural effects in architecture in achieving the communicated for architectural product depending heritage usage on different levels mentally. Formally and specially, research contains four axes: firstly, discusse the relation between textural effects and heritage continuity, and secondly, discusse the studies about textural effects, then differentiation the theoretical framework, thirdly, at last concluding the applying operations which represented by electing six main items of detailed theoretical field as the following. Firstly, the aims of textural effects, kind of textural effects, applications level of textural effects, Types depend on formal properties and Nature of the resources of textural effects, which limit the concept in architecture. In addition, the application of the items by electing four important projects in contemporary Iraqi architecture (as models) and crystallized the hypothesis, secondly. The application of the theoretical framework has revealed two patterns of utilization of textual effects in Iraqi Architecture, which attributed to designer architectural style. Similar results obtained from the theoretical framework had also been made by other observers, all of these points paid special attention about this effect in general. It is relation with heritage continuity in specific, which clarifies the utilization of it in two types. The revelations demonstrate the validity of the assumptions made in the development of the theoretical framework. Finally, this paper lays down a set of guidelines for other architects who wish to apply the type of Iraqi Architect to produce an Iraqi Architecture with textural effects under influence of continuity. Keywords Textural Effects, Heritage Continuity, Contemporary Iraqi Architecture}, keywords = {Keywords Textural Effects,Heritage Continuity,Contemporary Iraqi Architecture}, title_ar = {التأثيرات الملمسية وتواصلية التراث في النتاج المعماري العراقي المعاصر}, abstract_ar = {ألخلاصةتحددت مشكلة البحث بأهمية إثراء المعرفة فيما يخص طبيعة العلاقة بين التراث والتأثيرات الملمسية وارتباطاتهما النظرية تحت تأثير التواصلية ومناقشة الطروحات التي تناولت علاقةهذه التأثيرات بتواصلية التراث، وتحدد هدف البحث بطرح توضيح شامل لتوظيف التأثيرات الملمسية في العمارة في تحقيق الخلق المتواصل للنتاج المعماري المعتمد استلهام التراث وعلى مختلف المستويات الفكرية والشكلية فضلاً عن الفضائية، في العمارة بشكل عام وفي العمارة العراقية بشكل خاص، أما إجراءات البحث فقد تدرجت في أربعة محاور: وضح المحور الأول المفهومين الأساسيين وهما التراث والتأثيرات الملمسية وعلاقة كل منهما بالآخر، وحقيقة المعرفة المطروحة عن المفهومين، بينما تم في المحور الثاني مناقشة الدراسات التي تناولت مفهوم التأثيرات الملمسية ثم اشتقاق الإطار النظري الذي ضم ست مفردات رئيسية هي (ماهية التأثيرات الملمسية وأهداف توظيفها ونوعهاومستوى تطبيقها و وأنماطها تبعا لخصائصها الشكلية فضلا عن طبيعة مراجعها) (المحور الثالث)،أما في المحور الرابع فقد تم طرح إجراءات التطبيق المتمثلة بانتخاب المفردات الخمس الأخيرة للقياس ثم انتخاب عينة القياس وصياغة فرضية البحث المتمثلة بتوظيف المفهوم في العمارة العراقية المعاصرة وتباين أهداف توظيفها ونوعهاومستوى تطبيقها وأنماطها تبعا لخصائصها الشكلية فضلا عن طبيعة مراجعها بحسب الموقف الفكري للمصمم،أظهرت النتائج وجود أسلوبين لتوظيف التأثيرات الملمسية في النتاجات المعمارية العراقية والتي ارتبطت بقيم معينة لمتغيرات الاطار النظري،أثبتت الاستنتاجات فرضية البحث،وأكدت آراء بعض المنظرين حول هذه التأثيرات عموما وعلاقتها بتواصلية التراث خصوصا،والتي تبين استثمارها بنمطين متباينيين (نمط خاص بالمعمار العراقي وآخر خاص بالمعمار الغربي)، وقد دل هذا على أن بامكان المعماريين اتباع النمط الأول لانتاج عمارة عراقية بتأثيرات ملمسية خاصة تحقق التواصل مع التراث العراقي الأصيل.الكلمات الدالة: التأثيرات الملمسية، تواصلية التراث، العمارة العراقية المعاصرة}, keywords_ar = {الكلمات الدالة,تواصلية التراث,العمارة العراقية المعاصرة}, url = {https://rengj.mosuljournals.com/article_50470.html}, eprint = {https://rengj.mosuljournals.com/article_50470_62c508cde0289a677e89d76415f44573.pdf} } @article { author = {Wasmi Osman Luhaib, Saad and Khalid Khaleel Mohammed, Dr.}, title = {Design of Delta-Sigma ΣΔ based Fractional N PLL Frequency Synthesizer for GSM Mobile Systems}, journal = {Al-Rafidain Engineering Journal (AREJ)}, volume = {20}, number = {3}, pages = {26-34}, year = {2012}, publisher = {College of Engineering, University of Mosul, IRAQ}, issn = {1813-0526}, eissn = {2220-1270}, doi = {10.33899/rengj.2012.50474}, abstract = {Abstract This paper presents the design of Delta-Sigma ΣΔ based fractional N PLL frequency synthesizer for GSM mobile systems. The loop filter is one of main element in fractional-N ΣΔ synthesizer because it shapes the noise spectrum of quantization error and reduce the spurious level in the pass band of PLL. The effect of loop filter order is studied and it is shown that by increasing the order of the loop filter, the phase noise performance will be improved, although this requires careful design consideration, as the PLL is prone instability. It's shown that the 3rd order loop filter and 3rd order ΣΔ modulator gives the best performance with reducing phase noise (13dBc/Hz ) and spurious noise (44dBc) of the output signal. - Keyword: PLL, Frequency Synthesizer, ΣΔ Modulator, Fractional-N, GSM mobile systems.}, keywords = {Keyword,Frequency Synthesizer,Modulator,Fractional,GSM mobile systems}, title_ar = {تصميم مركب التردد المسند لدوائر إقفال الطور الجزئية للنظام الخلوي}, abstract_ar = {الخلاصةتناول هذا البحث تصميم ومحاكاة مركب التردد المسند لدوائر اقفال الطور الجزئية لاستخدامه في أنظمة الاتصالات الخلوية. حيث يعبر مرشح الدورة من العناصر الرئيسية لدوائر مركب التردد لانه يشكل طيف الضوضاء الناتج عن خطأ التكميم ويقلل من الضوضاء النبضية في PLL. حيث بينت النتائج ان زيادة درجة مرشح الدورة يحسن ضوضاء الطور ويحتاج الى عناية في التصميم لكي لا تصبح الدائرة غير مستقرة, كذلك تبين النتائج ان مرشح الدورة من المرتبة الثالثة هو الافضل من حيث تقليل ضوضاء الطور وزمن الخطأ حيث أعطى التصميم المقترح تحسينا واضحا من ناحية ضوضاء الطور(13dBc/Hz) وضوضاء النبضة (44dBc).}, keywords_ar = {}, url = {https://rengj.mosuljournals.com/article_50474.html}, eprint = {https://rengj.mosuljournals.com/article_50474_967b06fc0f43e2151b1b3eb84b246c33.pdf} } @article { author = {Khalid K. Mohammed, Dr. and H. Shakoory, Ghassan and J. Jerjees, Ziyad}, title = {Study and Fabrication of High Efficiency Indium Doped SnO2/SiO2/ n– Si Solar Cells.}, journal = {Al-Rafidain Engineering Journal (AREJ)}, volume = {20}, number = {3}, pages = {35-43}, year = {2012}, publisher = {College of Engineering, University of Mosul, IRAQ}, issn = {1813-0526}, eissn = {2220-1270}, doi = {10.33899/rengj.2012.50476}, abstract = {Abstract In this paper a new type of indium doped SnO2/SiO2/(textured) n-Si solar cell were prepared by vacuum evaporation source.. The SnO2 layer is simultaneously an antireflection coating and a transparent upper contract. The interfacial layer plays an important role in determining the short circuit current, open circuit voltage, fill factor and efficiency of the cell. In this paper, the effects of interfacial oxide layer thickness, SnO2 layer thickness, indium layer thickness were studied. The indium doped SnO2 layer reduces the cell series resistance and hence increase the cell output power, the performance parameters of the fabricated solar cell were as follows: an Voc of 0.646 V, Isc of 29.6 mA cm-2, a fill factor of 0.7 and a conversion efficiency of 13.38 at an AM 1.0 irradiance. Keywords: SnO2, Solar Cells, High Efficiency}, keywords = {KEYWORDS,Solar Cells,High Efficiency}, title_ar = {راسة وتصنيع خلية شمسية عالية الكفاءة نوع SnO2/SiO2/textured(n-Si}, abstract_ar = {ألخلاصةتم في هذا البحث تحضير الخلية الشمسية نوع SnO2/SiO2/textured(n-Si)- باستخدام طريقة التبخير الفراغي. تعتبر مادة الـ SnO2 كمادة مانعة للانعكاس وبنفس الوقت كطبقة نفاذة للضوء. تلعب مادة الاوكسيد العازلة SiO2 دور مهم في تعزيز قيمة تيار الدائرة القصيرة , فولتية الدائرة المفتوحة ,عامل الملئ وكفاءة الخلية الشمسية .كذلك تم في هذا البحث دراسة تأثير كل من سمك طبقة SnO2, SiO2 ومادة الانديوم. تم قياس خواص الخلية الشمسية المصنعة وكانت: فولتية الدائرة المفتوحة مساوية لـ 0.646 فولت ، تيار الدائرة القصيرة بحدود 29.6mA ,عامل المليء مساويا لـ 0.7 وكفاءة التحويل للخلية بحدود ٪13.38 عند ظروف إشعاع AM1.0.}, keywords_ar = {}, url = {https://rengj.mosuljournals.com/article_50476.html}, eprint = {https://rengj.mosuljournals.com/article_50476_fd1118d7e2457666ec8f95f9dfb2e678.pdf} } @article { author = {Sufer Ali, Luqman and Khalid Abdullah, Anas}, title = {Computer Simulation of The Effect of Band Cap Grading of The Cigs Absorber Layer on The Performance of Cds/Cigs Thin Film Solar Cell}, journal = {Al-Rafidain Engineering Journal (AREJ)}, volume = {20}, number = {3}, pages = {44-55}, year = {2012}, publisher = {College of Engineering, University of Mosul, IRAQ}, issn = {1813-0526}, eissn = {2220-1270}, doi = {10.33899/rengj.2012.50478}, abstract = {Abstract In this paper, the effect of the band gap grading of the absorber layer Copper Indium Gallium Selenide (CIGS), which is a compound semiconductor, on the performance of the solar cell has been studied. CIGS has a tuneable band gap and it varied with the composition of the semiconductor. This study has been accomplished using the computer simulation program SCAPS-1D. The program was developed to study the photonic devices especially CIGS and CdTe thin film solar cells. The effect of the grading shape (Front, Back and Double Grading) on the performance of the cell has been studied so as to improve the efficiency of the cell. Keywords: Band Gap Grading, CIGS, SCAPS-1D.}, keywords = {KEYWORDS,CIGS,SCAPS}, title_ar = {المحاكاة الحاسوبية لتاثير تدرج فجوة الطاقة المحظورة لطبقة الامتصاص CIGS على اداء الخلية الشمسية الرقيقة}, abstract_ar = {الخلاصةفي هذا البحث تمت دراسة تاثير تدرج فجوة الطاقة لطبقة الامتصاص نحاس انديوم كاليوم سلينيوم,و الذي يعتبر من اشباه الموصلات المركبة, على اداء الخلية الشمسية.ان مادة الـ CIGS لها فجوة طاقة يمكن ضبطها و تتغير مع تركيبة شبه الموصل هذا. هذه الدراسة انجزت باستخدام برنامج المحاكاة الحاسوبي SCAPS. البرنامج تم تصميمه لدراسة النبائط الضوئية خاصة الخلايا الشمسيةCIGS و CdTe. تاثير شكل الترج (الامامي, الخلفي و التدرج المزدوج ) على اداء الخلية تمت دراسته لغرض تحسين كفاءة الخلية الشمسية}, keywords_ar = {}, url = {https://rengj.mosuljournals.com/article_50478.html}, eprint = {https://rengj.mosuljournals.com/article_50478_c14793fed9e62cdad94df83f8e4bddb0.pdf} } @article { author = {S. Abdulla, Lujain and Sami A. Mawjoud, Dr.}, title = {Predictive Handoff Based on Mobile Positioning in CDMA System}, journal = {Al-Rafidain Engineering Journal (AREJ)}, volume = {20}, number = {3}, pages = {56-69}, year = {2012}, publisher = {College of Engineering, University of Mosul, IRAQ}, issn = {1813-0526}, eissn = {2220-1270}, doi = {10.33899/rengj.2012.50479}, abstract = {Abstract In this paper, the predictive schemes of reducing call termination during handoff in Code Division Multiple Access (CDMA) system using position location in the required handoff area with minimum false handoff, where the mobile station (MSs) are located randomly in the cell and each MS has call duration, speed and direction, the speeds and directions of the MSs are varied. The signals between the MSs and Base Stations (BSs) are dealt with by using position estimation method using time difference of arrival (TDQA) of the signals, estimation of the variable MS location, knowing the speed and the direction leading to a neighboring cell. The results obtained comply with Federal Communication Commission (FCC) which is internationally adopted. Also, the blocking probabilities for handoff and for new calls using Predictive Channel Reservation (PCR) scheme and Guard Channel (GC) are studied. The results show that predictive scheme reduces the blocking probability depending on the number of reserved channels. MATLAB software (version 7.6) was used to perform the simulation programs. Keywords: Mobile Position Estimation, Handoff CDMA System}, keywords = {KEYWORDS,Handoff CDMA System}, title_ar = {التنبؤ بالمناقلة اعتمادا على موقع الموبايل في نظام تقسيم الشفرة متعدد المنافذ}, abstract_ar = {المستخلص في هذا البحث تمت دراسة المخططات التنبؤية التي تقلل احتمالية قطع المكالمات أثناء عملية المناقلة في نظام تقسيم الشفرة متعدد المنافذ (CDMA) وذلك اعتمادا على تخمين موقع المحطة المتنقلة. تمت برمجة منظومة محاكاة لشبكة خلوية مكونة من سبعة خلايا سداسية الشكل، يكون توزيع المستخدمين فيها بشكل عشوائي ولكل منهم زمن مكالمة وسرعة واتجاه معين وتتغير السرع والاتجاهات باحتماليات مختلفة. كما تم تمثيل انتشار الإشارات بين المحطات المتنقلة (MSs) والمحطات الأساس(BSs) وباستخدام طريقة لتخمين موقع المحطة المتنقلة عن طريق حساب فرق زمن الوصول بين الإشارات ، تم تخمين الموقع المتغير وبالتالي معرفة سرعة واتجاه المحطة المتنقلة ومعرفة الخلية التي سيتوجه إليها. حيث تم الحصول على نتائج تفي بمتطلبات وكالة الاتصالات الاتحادية FCC. كذلك درست احتمالية الصدّ بالنسبة للمناقلة والمكالمات الجديدة في حالة استخدام مخطط قنوات الحماية Guard Channel وفي حالة استخدام مخطط حجز القنوات التنبؤي. وأظهرت النتائج أن المخطط التنبؤي يقلل احتمالية صد عمليات المناقلة بنسبة كبيرة وذلك اعتمادا على عدد القنوات المحجوزة. إنّ النتائج التي تم الحصول عليها في هذه البحث كانت من خلال برامج محاكاة كُتِبت ونُفِّذت باستخدام برمجيات MATLAB7.6 .}, keywords_ar = {}, url = {https://rengj.mosuljournals.com/article_50479.html}, eprint = {https://rengj.mosuljournals.com/article_50479_99479064d463bd1b01d3c82af66c0409.pdf} } @article { author = {Sami Mohammad Tahir, Sana}, title = {Vertical Handoff Algorithm for Heterogeneous Wireless Networks}, journal = {Al-Rafidain Engineering Journal (AREJ)}, volume = {20}, number = {3}, pages = {70-79}, year = {2012}, publisher = {College of Engineering, University of Mosul, IRAQ}, issn = {1813-0526}, eissn = {2220-1270}, doi = {10.33899/rengj.2012.50480}, abstract = {Abstracts Different wireless networks satisfy different users. The proposition of a single unified handoff approach is to offer the end user the quality of service (QoS) required. In this paper, vertical handoff between wireless fidelity (Wifi) and Universal Mobile Telecommunication System (UMTS) networks is investigated using MATLAB program 7.4 in order to maintain constant throughput during handoff. Three different propagation models are used. The variation of throughput with distance, received signal strength with distance and the effect of different speeds in macro and microcells are dealt with. Keywords: Vertical handoff, Throughput, Speed, Micro and Macro cells.}, keywords = {KEYWORDS,Throughput,speed,Micro and Macro cells}, title_ar = {خوارزمية المناقلة العمودية للشبكات اللاسلكية غير المتجانسة}, abstract_ar = {المستخلصالشبكات اللاسلكية المختلفة تلبي متطلبات مختلفة للمستخدمين. إن الغاية المتوخاة هي توفير طريقة واحدة عامة للمناقلة ذات جودة خدمات للمستخدم. في هذا البحث تم دراسة المناقلة العمودية بين شبكتين نوع Wifi وشبكة UMTS باستخدام البرنامج MATLAB 7.4 وذلك لغرض إدامة إخراج ثابت خلال المناقلة باستخدام ثلاثة نماذج للانتشار. المحاكاة تركزت على تغير الإخراج مع المسافة ، وقوة الإشارة المستلمة مع المسافة وتأثير الإخراج مع المسافة لسرع مختلفة في خلايا ماكرو Macro ومايكرو Micro.}, keywords_ar = {}, url = {https://rengj.mosuljournals.com/article_50480.html}, eprint = {https://rengj.mosuljournals.com/article_50480_0f7111f0f42c5ae620944a637808d093.pdf} } @article { author = {I. Abdulla, Abdulla}, title = {Linear Quadratic Regulator Using Artificial Immunize System}, journal = {Al-Rafidain Engineering Journal (AREJ)}, volume = {20}, number = {3}, pages = {80-91}, year = {2012}, publisher = {College of Engineering, University of Mosul, IRAQ}, issn = {1813-0526}, eissn = {2220-1270}, doi = {10.33899/rengj.2012.50481}, abstract = {Abstract This work demonstrates the application of Artificial Immunized System (AIS) in designing on-line the parameters of the Linear Quadratic Regulator (LQR) for SISO plant. The AIS is used in creating the adaptive critics which represent the matrix parameters in the solution of the Riccati equation of the LQR. It is found that the AIS possess promising features to deal on-line with the plant parameter variations and reflect acceptable regulating and tracking characteristics. Key words: Artificial Immunized System, Evolutionary Algorithms, Adaptive Systems, Linear Quadratic Regulator.}, keywords = {Key Words,Evolutionary Algorithms,Adaptive Systems,Linear Quadratic Regulator}, title_ar = {المنظم الخطي المتعامد بأستخدام نظام المناعة الاصطناعي}, abstract_ar = {المستخلصيوضح هذا العمل تطبيق نظام المناعة الاصطناعي (AIS) في التصميم الأني لمتغيرات المنظم الخطي المتعامد (LQR) لنظام ذو إدخال واحد وإخراج واحد (SISO). يستخدم نظام المناعة الاصطناعي (AIS) في تكوين النقاد التكيفي والذي يمثل عناصر المصفوفة الموجودة في حل معادلة Riccati للمنظم الخطي المتعامد . ووجد بأن نظام المناعة الاصطناعي يمتلك ملامح واعدة للتعامل الاني مع متغيرات النظام ويعكس خواص تنظيم و تتبع مقبولة.الكلمات الدالة: نظام المناعة الاصطناعي ، الخوارزميات التطورية، النظام المتكيف، المنظم الخطي المتعامد.}, keywords_ar = {الكلمات الدالة,الخوارزميات التطورية,النظام المتكيف,المنظم الخطي المتعامد}, url = {https://rengj.mosuljournals.com/article_50481.html}, eprint = {https://rengj.mosuljournals.com/article_50481_384826319226d62895bab542af6a6384.pdf} } @article { author = {Fiz, Duraid and Mohammad, a}, title = {Design of a PC-Based Command and Control System Using Alpha-Beta-Gamma Digital Tracking Filter}, journal = {Al-Rafidain Engineering Journal (AREJ)}, volume = {20}, number = {3}, pages = {92-102}, year = {2012}, publisher = {College of Engineering, University of Mosul, IRAQ}, issn = {1813-0526}, eissn = {2220-1270}, doi = {10.33899/rengj.2012.50482}, abstract = {Abstract In this paper, a software model for a Command and Control system is implemented on personal computer. This model can also be used for navigation, or Air Traffic Control (ATC) systems. The hardware required for implementation of this system is also described in this paper. The system assumed to have a fixed position detection source such as the surface search radar. The principle of Track-While-Scan (TWS) that combines the automatic detection of targets and the automatic multi target tracking is used. The Simplified Alpha-Beta-Gamma (--) digital filter is used to perform the algorithm of the automatic tracking. The model main program and all necessary routines are written in C++ language. Successful tests for the implementation of this system are achieved. Keywords: Command and Control, Track-While-Scan, target, Alpha-Beta-Gamma filter, navigation, ATC}, keywords = {KEYWORDS,Track,While,Scan,target,Alpha,beta,Gamma filter,navigation,ATC}, title_ar = { تصميم منظومة قيادة وسيطرة بأعتماد الحاسبة الشخصية وأستخدام مرشح التتبع الرقمي الفا-بيتا-كاما}, abstract_ar = {الخلاصة تم في هذا البحث تصميم وفحص عمل أنموذج برمجي لمنظومة قيادة وسسيطرة باستخدام الحاسبة الشخصية. وهذا النموذج يمكن تطبيقه ايضا" لمنظومات الملاحة أو السيطرة الجوية. كذلك تم وصف المتطلبات المادية لتنقيذ مثل هكذا منظومة. تم تصميم هذه المنظومة لتعمل على كشف الأهداف بأستخدام الرادار الأرضي الثابت ومبدأ التتبع خلال عملية المسح والذي يجمع بين مبدأ الكشف والمتابعة الطوعيان لأكثر من هدف في آن واحد.تم في هذا البحث استخدام المرشح الرقمي الفا-بيتا-كاما المبسط لتنفيذ خوارزميات التتبع الطوعي، واعتماد لغة C++ في بناء هذة المنظومة، علما" انه قد تم اختبار عمل هذه المنظومة بنجاح.}, keywords_ar = {}, url = {https://rengj.mosuljournals.com/article_50482.html}, eprint = {https://rengj.mosuljournals.com/article_50482_c10ff8aa40113903f3f93af5f3f16912.pdf} } @article { author = {H. Ali, Fakhrulddin and M. Hussein, Mohammed}, title = {FPGA Implementation of a Fuzzy Control Surface}, journal = {Al-Rafidain Engineering Journal (AREJ)}, volume = {20}, number = {3}, pages = {103-116}, year = {2012}, publisher = {College of Engineering, University of Mosul, IRAQ}, issn = {1813-0526}, eissn = {2220-1270}, doi = {10.33899/rengj.2012.50483}, abstract = {Abstract This paper presents a design methodology of a dual-input single-output fuzzy logic controller where synthesizing the classical three stages, fuzzification, inference engine, and defuzzification, are replaced by the outcome control surface obtained from these stages which is treated as a tow dimensional table called fuzzy control table FCT. With this proposed approach, (8x8), (16x16), (32x32), and (64x64) FCTs were investigated each having 64, 256, 1024, and 2048 values respectively. To make this system adaptable to different operating states a supervisor fuzzy controller is designed to continuously adjust, on line, the output factor of the basic fuzzy controller based on the error and change in error signals. The proposed architecture is implemented in XC3S200 FPGA, Spartan-3 starter kit to control the position of a D.C. servo motor with unknown parameters in real time. Keywords: control table, FPGA, fuzzy control surface, supervisor controller.}, keywords = {KEYWORDS,FPGA,fuzzy control surface,supervisor controller}, title_ar = {تنفيذ سطح السيطرة المضبّب باستخدام FPGA}, abstract_ar = {الخلاصةيقدم هذا البحث طريقة عملية وعامة لتصميم المسيطرات المضبّبة ذات الإدخالين عن طريق تمثيل سطح السيطرة المضبّب للمسيطر المصمم بشكل جدول ثنائي الأبعاد يسمى جدول السيطرة المضبّب بدلاً من إتباع الطريقة التقليدية في تركيب المراحل الأساسية الثلاث للمسيطر (التضبيب, آلة الاستدلال الضبابي, إزالة التضبيب). حيث تم بناء جدول السيطرة بأحجام مختلفة وهي (8x8), (16x16), (32x32), (64x64), كل جدول يتكون من 64, 256, 1024, 2048 قيمة على التوالي. ولجعل منظومة السيطرة المضبّبة المصممة متكيفة مع تغير حالات التشغيل تم تصميم مسيطر مضبّب مشرف يقوم بتعديل قيمة معامل إخراج المسيطر المضبّب الرئيس أثناء العمل وبالاعتماد على إشارتي الخطأ والتغير في الخطأ. إن تنفيذ معمارية السيطرة المضبّبة تم بواسطة مصفوفة البوابات القابلة للبرمجة حقلياً نوع (XC3S200 FPGA) واستخدم المسيطر في التحكم بالموقع من خلال محرك تيار مستمر مجهول المعاملات وفي الزمن الحقيقي.}, keywords_ar = {}, url = {https://rengj.mosuljournals.com/article_50483.html}, eprint = {https://rengj.mosuljournals.com/article_50483_ce6453b57b4fdf553105ed5f4817f95a.pdf} } @article { author = {Ahlam Fadhil Mahmood, Dr. and Mohameed Salih, Abdulkreem}, title = {A Modified Color JPEG Codec System Using inter pixel Redundancy}, journal = {Al-Rafidain Engineering Journal (AREJ)}, volume = {20}, number = {3}, pages = {117-127}, year = {2012}, publisher = {College of Engineering, University of Mosul, IRAQ}, issn = {1813-0526}, eissn = {2220-1270}, doi = {10.33899/rengj.2012.50484}, abstract = {Abstract: Image compression is an important topic in commercial, industrial, and academic applications. Whether it be in commercial photography, industrial imaging, or video, digital pixel information can comprise considerably large amounts of data. Management of such data can involve significant overhead in computational complexity, storage, and time processing. This paper presents the implementation of a Modified JPEG CODEC algorithm for color images based on inter pixel redundancy. The modification uses the similarity of the adjacent pixels in blocks to omit complex calculation which AC components require in 2D-DCT unit. It applies quantize operation to one element instead of 64 coefficients and eliminates the zigzag unit. Finally , the entropy phase will process a smaller amount of data. In the decoder side the Laplacian parameter is estimated adding to a reduction in the accounts of blocks that have same neighbors pixels. The extensive experimental results demonstrate that the proposed approach can achieve best image quality. The Simulation results show that the Modified JPEG(MJPEG) algorithm can process a 512 X 512 color image in a reduced processing time ( more than 40%) compared to the original algorithm and by more resilience with higher compression ratio. Keywords: JPEG; color image; encoder; decoder.}, keywords = {KEYWORDS,color image,Encoder,decoder}, title_ar = {نظامJPEG محسن لكبس وفك كبس الصور الملونة باستخدام الزيادة في عناصر الصورة}, abstract_ar = {الملخصيعتبر ضغط الصور موضوعا مهما في التطبيقات التجارية والصناعية والأكاديمية, سواء أكان ذلك في التصوير التجاري أو التصوير الصناعي ، أو الفيديو ، تشمل المعلومات الرقمية كميات كبيرة من البيانات إلى حد كبير. تنطوي إدارة مثل هذه البيانات على أعباء كبيرة منها التعقيد الحسابي في معالجة الكم الهائل من البيانات ، وتخزين هذا الكم بالإضافة لطول الوقت اللازم لمعالجتها . يعرض هذا البحث تنفيذ تحسين لخوارزمية IJPEG / JPEG للصور الملونة على أساس تكرار عناصر الصورة . التعديل استخدم التشابه في عناصر الصورة المتجاورة ضمن الكتلة الواحدة لحذف الحسابات المعقدة اللازمة لإيجاد معاملات AC لوحدة تحويل الجيب التمام ، وتطبيق عملية التكميم لعنصر واحد بدلا من 64 معامل لكل كتلة ، والقضاء على مرحلة الخط المتعرج(zigzag). أخيرا ، عملية التشفير تجرى على عدد أقل من البيانات. في جانب فك الكبس تم تقدير معامل التباين بالإضافة لتقليل الحسابات للكتل متساوية المحتوى . أن كل من التحليل النظري ونتائج التجارب تثبت أن النهج المقترح يمكن أن يحقق جودة أفضل للصورة. تبين نتائج المحاكاة أن الخوارزمية المعدلة يمكن أن تعالج صورة ملونة بحجم 512x 512 في وقت أقل ) بأكثر من 40 ٪) بالمقارنة مع الخوارزمية ماقبل التحسين وبمرونة أعلى مع زيادة نسبة الكبس.}, keywords_ar = {}, url = {https://rengj.mosuljournals.com/article_50484.html}, eprint = {https://rengj.mosuljournals.com/article_50484_13c4d9e5238c83fd17c93fe0537e542a.pdf} } @article { author = {Hussain H. Ahmad, Dr.}, title = {Heat Transfer Characteristics in a Heat Pipe Using Water-Hydrocarbon Mixture as a Working Fluid. (An Experimental Study}, journal = {Al-Rafidain Engineering Journal (AREJ)}, volume = {20}, number = {3}, pages = {128-137}, year = {2012}, publisher = {College of Engineering, University of Mosul, IRAQ}, issn = {1813-0526}, eissn = {2220-1270}, doi = {10.33899/rengj.2012.50485}, abstract = {Abstract The heat pipe is a very effective device in heat transport, therefore it is used in many industrial applications especially in cooling systems. In the present experimental work, wickless heat pipe(thermosyphon)is designed and constructed from a copper tube of inside and outside diameters (13.5) and (15.5)mm respectively with total length of (600)mm divided into three sections evaporator; adiabatic section and a finned air cooled condenser simulating the actual applications in practice of this device. Pure water, pure hydrocarbon fluid (acetone) and mixtures of the two fluids at different ratios by weight were used as working fluid to investigate the effect of a working fluid type and mixture ratio on the performance of the device. Results show that using pure fluid is more effective than using mixture. Comparison between results of the present work and a theoretical correlation shows a good agreement especially when using pure fluid. Keywords: Thermo syphon; Heat pipe; Mixture.}, keywords = {KEYWORDS,Heat pipe,Mixture}, title_ar = { خصائص انتقال الحرارة في أنبوب حراري باستخدام خليط ماء- هايدروكاربون كمائع تشغيل (دراسة عملية)}, abstract_ar = {الخلاصةالأنبوب الحراري جهاز ذو فعالية عالية في نقل الحرارة. لذا يستخدم في كثير من التطبيقات الصناعية وخاصة في منظومات التبريد. تم في البحث الحالي تصميم وتصنيع أنبوب حراري (بدون فتيلة) من أنبوب نحاسي ذي أقطار داخلية وخارجية (13.5),(15.5) ملم على التوالي وبطول كلي (600) ملم مقسم إلى ثلاثة أجزاء: المبخر, الواصل المعزول والمكثف ذي الزعانف والمبرد بالهواء كمحاكاة لتطبيقات عملية. استخدم الماء النقي والهايدروكاربون النقي (أسيتون) وخليط من هذين المائعين بنسب مختلفة كمائع تشغيل وذلك لاستقصاء تأثير نوع المائع ونسب الخليط على أداء الجهاز . أظهرت النتائج أن استخدام مائع نقي بدل الخليط يكون أكثر كفاءة من استخدام خليط من مائعين. أظهرت المقارنة بين نتائج البحث الحالي مع علاقات نظرية توافقا جيدا خاصة عند استخدام مائع نقي.}, keywords_ar = {}, url = {https://rengj.mosuljournals.com/article_50485.html}, eprint = {https://rengj.mosuljournals.com/article_50485_4f2f28dad915b90366193b4ca909d9cd.pdf} } @article { author = {Fathi, Youns}, title = {Thermal Evaluation of Applying Combined Cycle Mode to Beijee Gas Turbine Generators}, journal = {Al-Rafidain Engineering Journal (AREJ)}, volume = {20}, number = {3}, pages = {138-147}, year = {2012}, publisher = {College of Engineering, University of Mosul, IRAQ}, issn = {1813-0526}, eissn = {2220-1270}, doi = {10.33899/rengj.2012.50486}, abstract = {Exhaust gases of gas turbine generators contain a significant amount of thermal energy which can be recovered externally or internally to the cycle itself. The most effective technology option for external heat recovery is the combined gas-steam power plant. The internal recovery conventional solutions are based on thermodynamic regeneration and steam injection. In this study a thermal analysis and performance evaluation has been carried out to investigate the benefit of applying combined cycle power plant on Beijee simple gas turbine generators. Beijee gas turbine generator has been modeled and simulated to observe its performance including power output , thermal efficiency , specific fuel consumption and exhaust gas temperature as it is operating for the time being. Thereafter, simulation was carried out to investigate the performance of the suggested unit when a combined cycle power plant is used. Results show that a significant improvement in the performance of Beigee gas turbine unit when a combined cycle mode is applied. For example the power output is found to be increased nearly by 49.3%, the thermal efficiency increased nearly by 20% and the specific fuel consumption decreased nearly by 10%.}, keywords = {}, title_ar = {التقييم الحراري لوحدات بيجي الغازية بتطبيق نظام الوحدات التوليد المركبة}, abstract_ar = {الخلاصةتحتوي غازات العادم للوحدات الغازية على كمية من الطاقة الحرارية والتي يمكن الاستفادة منها ضمن الدورة نفسها او خارجيا عن طريق مبادل حراري. ان من اهم التقنيات المتاحة للاستفادة من الطاقة الحرارية لغازات العادم خارجيا هي وحدات التوليد المركبة . بينما يمكن الاستفادة ضمنيا من الطاقة الحرارية عن طريق مبادل حراري داخلي لتسخين الهواء قبل دخوله غرفة الاحتراق او عن طريق حقن البخار. تم في هذه الدراسة إجراء تحليل حراري و تقييم أداء لمعرفة مقدار الفائدة المرجوة في حالة تطبيق وحدة توليد مركبة على الوحدات الغازية في محطة بيحي الغازية. تم نمذجة وحدة غازية مشابهة لتلك الموجودة في محطة بيجي ، و تم ملاحظة الأداء والذي شمل كل من القدرة المتولدة، الكفاءة الحرارية ، الاستهلاك النوعي للوقود بالإضافة إلى درجة حرارة غازات العادم ، بعد ذلك تم ملاحظة أداء الوحدة المركبة المقترحة.بينت النتائج التي تم الحصول عليها إن أداء الوحدة الغازية في محطة بيجي الغازية يتحسن كثيرا عند تطبيق الوحدات المركبة. فمثلا وجد ان القدرة الناتجة تزداد بمقدار تقريبا 49.3%و في حين ان الكفاءة الحرارية تزداد تقريبا بمقدار 20% بينما وجد ان الاستهلاك النوعي للوقود ينخفض تقريبا بما مقداره 10%.}, keywords_ar = {}, url = {https://rengj.mosuljournals.com/article_50486.html}, eprint = {https://rengj.mosuljournals.com/article_50486_c269a28fc9bfa7ea1aa83643ff3bbcbb.pdf} } @article { author = {A. Khalil, ad}, title = {Reduction of Pollutant Emission in Ethanol-Gasoline Blends Engines with Magnetic Fuel Conditioning}, journal = {Al-Rafidain Engineering Journal (AREJ)}, volume = {20}, number = {3}, pages = {148-154}, year = {2012}, publisher = {College of Engineering, University of Mosul, IRAQ}, issn = {1813-0526}, eissn = {2220-1270}, doi = {10.33899/rengj.2012.50487}, abstract = {Abstract This paper represents an experimental investigation to evaluate the effect of magnetic field on exhaust emissions and engine performance of four-stroke, single piston spark-ignition engine working with (10% vol.)Ethanol-Gasoline blends. Carbon monoxide CO, carbon dioxide CO2 and unburned hydrocarbon HC are examined during running of the engine with and without the presence of magnetic coils. The engine performance parameters (brake power, brake specific fuel consumption and brake thermal efficiency) are investigated too .Two magnetic coils with different intensities (1000 and 2000 Gauss) were used . The magnetic coil is placed on the line of fuel supply before the carburetor. All tests were conducted at a wide open throttle (WOT) , compression ratio 10:1 , speed of 2000 rpm and ignition timing ( between 50 and 300 BTDC ) . Results show a significant reduction in exhaust gas emissions when applying the magnetic field. A maximum reduction of 68.8 % of CO, 15 % of CO2 and 42.5 % of HC are observed when using 2000 Gauss magnetic coil. Moreover, it was noticed that all engine-affecting parameters were improved. Running the engine with 2000 Gauss and 10 vol.% ethanol-gasoline blends shows better results ( concerning pollution emissions and brake thermal power ) than 1000 Gauss magnetic coil .}, keywords = {}, title_ar = {تقليل انبعاث الملوثات الغازية من محركات الاحتراق الداخلي التي تعمل بمزيج الايثانول – الكازولين الممغنط}, abstract_ar = {المستخلص يهدف هذا البحث إلى تقييم مدى تأثير المجال المغناطيسي على انبعاث الملوثات الغازية من محركات الاحتراق الداخلي التي تعمل بمزيج 10% ايثانول - كازولين . شمل البحث اختبار كمية انبعاث غازات اول اوكسيد الكاربون و ثاني اوكسيد الكاربون و الهيدروكاربونات غير المحترقة عند اشتغال المحرك مع او بدون المجال المغناطيسي . تقييم أداء المحرك شمل أيضا كل من القدرة الفرملية و معدل استهلاك الوقود النوعي و الكفاءة الحرارية . تم استخدام نوعين مختلفي الشدة من الملفات المغناطيسية , الأول شدته ( 1000 كاوس ) و الثاني شدته ( 2000 كاوس ) وضعا على خط تجهيز الوقود قبل المبخرة . أجريت كافة الاختبارات عند سرعة دورانية مقدارها ( 2000 دورة / دقيقة ) , بنظام فتحة خنق واسعة للمبخرة , نسبة انضغاط 10الى 1 و بتغيير وقت بدء القدح من 5 إلى 30 درجة . أظهرت النتائج انخفاضا ملحوظا في كمية انبعاث الملوثات الغازية عند استخدام المجال المغناطيسي , حيث انخفض انبعاث غاز اول اوكسيد الكاربون بمقدار (68,8%) و غاز ثاني اوكسيد الكاربون بمقدار (15%) و الهيدروكاربونات غير المحترقة بمقدار (42,5%) عند استخدام الملف المغناطيسي (2000 كاوس ) . إضافة إلى ذلك فقد لوحظ تحسن واضح في أداء المحرك مثل القدرة الفرملية و معدل استهلاك الوقود النوعي و الكفاءة الحرارية عند مغنطة مزيج وقود ايثانول – كازولين . بشكل عام فقد كانت كمية الملوثات الغازية المنبعثة عند استخدام الملف المغناطيسي (2000 كاوس) اقل منها عند استخدام الملف ( 1000 كاوس}, keywords_ar = {}, url = {https://rengj.mosuljournals.com/article_50487.html}, eprint = {https://rengj.mosuljournals.com/article_50487_3209518725bd96c2ab7fd63d23741157.pdf} } @article { author = {M Al-Taei, Dr.A. and Aswad, N.H and Hussien, N.A}, title = {Characteristics of Parking Garages within Multi-story Building in Duhok CBD Area}, journal = {Al-Rafidain Engineering Journal (AREJ)}, volume = {20}, number = {3}, pages = {155-166}, year = {2012}, publisher = {College of Engineering, University of Mosul, IRAQ}, issn = {1813-0526}, eissn = {2220-1270}, doi = {10.33899/rengj.2012.50488}, abstract = {In this study, four multi-story building parking garages located within the CBD area of Dohuk city had investigated for different characteristics of parking behavior for user. Parking accumulation, volume, walking distance to destination point, turnover, duration, and mode of travel were investigated within the duration from 9:30 a.m. up to 4:30 p.m. Trip purpose were introduced within a special interview form used to collect the necessary parking data from each facility users. Figures, and tables presented out of this study demonstrate that the amount of spaces provided on the three parking facilities were about 717 spaces with peak demand already taking place at mid-noon. Average walking distance concluded was 155m and four hours as an average parker duration. Average turnover obtained out of the data analysis was 1.09 vehicles /one space.}, keywords = {}, title_ar = {دراسة لمواقف المرکبات متعددة ألطوابق الواقعة فی مرکز المدینة}, abstract_ar = {ألخلاصة فی هده الدراسة,تم إجراء التحریات لثلاثة أبنیة متعددة ألطوابق لمواقف المرکبات والواقعة ضمن الرقعة الجغرافیة فی المرکز التجاری لمدینة دهوک لدراسة مختلف الخواص الهندسیة لها والمتأثرة بطبیعة تصرف السواق المستخدمین.تم جمع بیانات حول تراکم وقوف المرکبات,حجوم التوقف, مسافة السیر إلى منطقة الهدف,عدد مرات تبادل نفس الموقف, الفترة الزمنیة للوقوف, وأنواع المرکبات المتوقفة مابین 9:30 صباحا و 4:30 مساءا. الغرض من الرحلة والدی تم التعرف علیه من خلال استبیان خاص تم القیام به باستخدام استمارة خاصة بدلک لکل من المستخدمین للمواقف.النتائج والجداول الستحصلة والمعروضة فی هده الدراسة توضح بأن عدد المواقف المتوفرة للأبنیة المتعددة الطوابق ألثلاثة کانت 717 موقفا وأن ساعة ألذروة للازدحام هی فی منتصف النهار. معدل مسافة المشی المستنتجة من هده ألدراسة هی 155متر تقریبا ومعدل فترة التوقف أربع ساعات.معدل عدد تبدیل المواقع التی تم الحصول علیها من تحلیل البینان کانت1.09 مرکبة لکل محل وقوف.}, keywords_ar = {}, url = {https://rengj.mosuljournals.com/article_50488.html}, eprint = {https://rengj.mosuljournals.com/article_50488_820aa99fb4a62e215f32f116e0fc15bc.pdf} }