eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2008-09-28
16
4
1
12
10.33899/rengj.2008.44715
44715
Non-Linear Finite Element Analysis Of Reinforced Concrete Slabs For Creep And Shrinkage
تحليل العناصر المحددة اللاخطي للسقوف الخرسانية المسلحة للزحف والانكماش
Majid A. AL Jurmaa
1
Ayad A. Abdul -Razzak
2
A non-linear, layered, finite element model for predicting the time dependent behavior of reinforced concrete slabs under sustained transverse loading is presented. The effects of biaxial creep and shrinkage are accounted for using short form of creep and shrinkage prediction model B3 for structures of medium sensitivity. The layered approach is used to represent the steel reinforcement and discretize the concrete slab through the thickness. The reinforcement steel is represented as a smeared layer of equivalent thickness with uniaxial strength and rigidity properties. Elastic perfect plastic approaches have been employed to model the compressive behavior of the concrete. The yield condition is formulated in terms of the first two-stress invariant. The movement of the subsequent loading surfaces is controlled by the hardening rule, which is extrapolated from the uniaxial stress-strain relationship defined by a parabolic function. concrete crushing is a strain controlled phenomenon. Which is monitored by a fracture surface similar to the yield surface. A smeared fixed crack approach is used to model the behavior of the cracked concrete, coupled with a tensile strength criterion to predict crack initiation. Several examples for which experimental results are available are analyzed, using the proposed model .The comparison showed good agreement.
Key words: Creep and Shrinkage, Nonlinear Analysis Reinforced Concrete Slabs, Time Dependent analysis.
الخلاصة استعملت طريقة العناصر المحددة لبحث أداء البلاطات الخرسانية المسلحة المعتمد على الزمن سواء كانت هذه الأحمال ثابتة أو متغيرة. مثل تأثير الزحف والانكماش اعتمادا على النموذج المختصر B3 لتقدير الزحف والانكماش للمنشآت معتدلة الحساسية ، يستند البرنامج المستخدم في هذا البحث الى صياغة العناصر المحددة ، حيث يحتوي كل عنصر على ثمان عقد ، وكل عقدة تمتلك خمس درجات للحرية.استعمل أسلوب تقسيم السمك إلى طبقات لتمثيل سلوك الخرسانة خلال السمك، استخدم اسلوب الطبقات لتمثيل حديد التسليح كطبقة ضمن طبقات الخرسانة ، مع استخدام نظام الإحداثيات المعدلة . مثل سلوك الخرسانة بعد الخضوع في حالة الانضغاط كمادة مرنه تامة اللدونه أو كمادة مرنه مع انفعالات لدنه متصلده شروط الخضوع عبر عنها بدلالة أول متغيرين للإجهاد . حركة سطوح التحميل حكمت بقاعدة التصلب التي تتحدد من علاقة الإجهاد –الانفعال الأحادي المحور والمعبر عنها بدلالة القطع المكافئ.سحق الخرسانة هي ظاهرة محكومة بالانفعال ومنظمة بسطح سحق يشبه سطح الخضوع . استخدم أسلوب الشق الثابت لتمثيل سلوك الخرسانة المتشققة مع شرط الشد للتنبؤ بحدوث الشق . كما اخذ بنظر الاعتبار تأثير صلابة الشد في الخرسانة المتشققة. حديد التسليح اعتبر كمادة مرنة تامة اللدونه مع تصلب انفعال خطي . اعتبر سلوك حديد التسليح متشابه تحت تأثير قوى الشد والانضغاط . حللت عدة أمثله ذات نتائج عمليه منشوره باستعمال الأسلوب المقترح و أظهرت توافقأ جيدا مع النتائج العددية.
https://rengj.mosuljournals.com/article_44715_eb5c219072e5f5296db2478b3f8bd48d.pdf
Key Words
Nonlinear Analysis Reinforced Concrete Slabs
Time Dependent analysis
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2008-09-28
16
4
1
16
10.33899/rengj.2008.44741
44741
Studying The Influence Of Compacting Method On The Engineering Properties Of Expansive Clayey Soil
دراسة تأثير طريقة الرص على الخصائص الهندسية لتربة طينية انتفاخية
Ali H. Al-Bayati
1
Ibrahim M. Al-Kiki
2
Khawla A. Al-Juari
3
Anas F. Qassid
4
Abstract
This study deals with the effect of two methods of compaction (static compaction (S.C.) and dynamic compaction (D.C.)), on the engineering properties of high plasticity clayey soil (CH) selected from Mosul city.
Results showed that maximum dry density of soil compacted by static method is higher than that compacted by dynamic method. But the inverse was obtained for optimum moisture content. Unconfined compressive strength, effective shear strength parameters (ć, ǿ), splitting and California Bearing Ratio (CBR) for soil compacted by dynamic method has higher values than that compacted by static method.
Swelling pressure and free swell tests gave higher values under static compaction method. But the values of compression index and coefficient of consolidation using dynamic compaction method gave higher values.
On the other hand, the results of crumb, slackening and pinhole tests showed that the internal erosion of soil compacted by dynamic method are less than that compacted by static method. From filter paper method and soil water characteristic curves showed that compaction methods had no effect on soil suction. Finally, statistical models between engineering properties for soil compacting by two methods were obtained.
الخلاصةيتناول البحث دراسة تأثير طريقتي الرص (الساكن والديناميكي) على الخصائص الهندسية لتربة طينية عالية اللدونة (CH) مختارة من مدينة الموصل. أظهرت النتائج أن وحدة الوزن الجاف للتربة بطريقة الرص الساكن اكبر منها للرص الديناميكي، في حين وجد العكس بالنسبة للرطوبة المثلى. إن قيم كل من قوة الانضغاط غير المحصور، معاملات قوة قص التربة الفعالة (ć, ǿ)، قوة الشد غير المباشر ونسبة التحمل الكاليفوريني (CBR) للتربة المسبوكة بطريقة الرص الديناميكي اكبر منها للرص الساكن.نتائج فحص الانتفاخ بينت إن نسب وضغط الانتفاخ للتربة المسبوكة بطريقة الرص الساكن اكبر منه للرص الديناميكي. كما أظهرت نتائج فحص الانضمام إن كل من دليل الانضغاط (cc) ومعامل الانضمام (cv) للتربة المسبوكة بطريقة الرص الديناميكي اكبر منه للرص الساكن. في حين إن معامل النفاذية بطريقة الرص الديناميكي اقل منه للرص الساكن.من جانب آخر، بينت نتائج فحوصات الفتات والركود والثقب (Pinhole test) إن التآكل الداخلي للتربة المسبوكة بالرص الديناميكي اقل منه للتربة المسبوكة بالرص الساكن. وجد من طريقة ورق الترشيح ومنحنيات خاصية التربة-الماء إن طريقة الرص ليست لها تأثير على اجهادات مص التربة. أخيرا، تم التوصل إلى أفضل العلاقات الرياضية بين خصائص التربة الهندسية للتربة المسبوكة بطريقتي الرص. الكلمات الدالة: التربة الطينية، بنية التربة، مقاومة القص، التغير ألحجمي، الخواص الهيدروليكية.
https://rengj.mosuljournals.com/article_44741_a0ad39d4acaed8e2b3a0d94babc2cc8b.pdf
الكلمات الدالة
بنية التربة
مقاومة القص
التغير ألحجمي
الخواص الهيدروليكية
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2008-09-28
16
4
13
29
10.33899/rengj.2008.44722
44722
Behaviour And Strength Of High Strength Concrete L-Beams Under Combined Shear, Bending And Torsional Loading
استخدام الاسفلت السائل لتحسين التربة الجبسية
Ferhad R. Karim
1
Ferhad R. Karim
2
Omer Qarani Aziz
3
Abstract
This investigation examines experimentally the behavior and ultimate strength of L-shaped reinforced high strength concrete beams under combined shear, bending and torsion.
The experimental program consists of casting and testing (13) high strength concrete beams under bending, shear and torsion. The main parameters are the effect of compressive strength, the eccentricity and transverse to longitudinal reinforcement ratio.
An increase in transverse to longitudinal reinforcement ratio by (21.43%) for beams under 80mm eccentricity of loading causes decrease in ultimate resisting torsional moment by (13.19%), and for an eccentricity of 170mm; the decrease in resisting torsional moment is (15.14%). Increasing in eccentricity for torsion of (112.5%) caused a decrease in load carry capacity by (43.33%) if all types of reinforcement remain the same.
By using multiple nonlinear stepwise regression analysis, based on data in this research and from other literatures; equations are proposed for predicting shear strength at cracking and ultimate loads and torsional capacity at cracking and ultimate loads. These proposed equations showed good agreement when compared with equations given by Codes of practice like (ACI, Canadian and BS) and showed good relations..
Keywords: Bending, high strength concrete, L-shaped beams, shear, torsion.
الخلاصةهذا البحــث يهدف الى دراســــة مقاومة و سلوك عتبات الزاوية المسلحة المصنوعة من خرسانة عالية المقاومة تحت تاثيرالانحناء , القص و الالتواء. لهذا الغرض تم صب و فحص (13 ) عتبة خرسانية مسلحة لدراسة تاثير مقاومة الأنضغاط, مسافة اللامركزية و التسليح العمودي الى الطولى. بزيادة نسبة 21ز43% لتسليح العمودي الى الطولي و بمسافة لامركزية 80ملم يؤدي الى نقصان الحد الأقصى للالتواء بمقدار (13.19 %) و لمسافة اللامركزية (e= 170mm) تقل بمقدار (15.14 %). زيادة المسافة اللامركزية بمقدار (112.5 %) يؤدي الى نقصان لاقصى حمل بنسبة (43.33 %) لنفس المتغيرات (انواع التسليح).اعتمادا على البيانات في هذا البحث مع البيانات الموجودة في البحوث الاخرى , اقترحت مختلف المعادلات لايجاد كل من جهد القص و عزم الالتواء الاقصى. المعادلات المقترحة في هذا العمل للعتبات تحت تاثير الانحناء ,القص و الالتواء و ذات مقاومة الانضغاط محصورة بين (21-83 ميكا باسكال) و فضاء القص الى عمق الفعال محصورة ايضا بين (2.5-6 ), و هذه المعادلات قورنت بمعادلات مقترحة من قبل (ACI,Canadian,BS) فاظهرت نتائج جيدة عند مقارنتها.
https://rengj.mosuljournals.com/article_44722_da62b7bd05800fabb8961b1e0bbeb1d6.pdf
KEYWORDS
High Strength Concrete
shaped beams
shear
torsion
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2008-09-28
16
4
17
26
10.33899/rengj.2008.44742
44742
Effect of chisel plow shanks shape on power Requirements of Tractor
تأثير شكل قصبة المحراث الحفار في متطلبات القدرة للساحبة
Mahmood Elias Ahmed Al-Taee
1
Saad Abdul Jabbar Al- Rajaboo
2
Abstract
This study was carried out at two sites of different soil texture, clay and a clay loam during the season of 2005 – 2006 In Mosul .A plough of three different shank shapes have been used . These shapes were vertical, inclined forward and curved with two plough depths of 8-12 cms and 13-17 cms successively with three speeds 3.70, 7.15 and 9.64 km/hour. In order to study the effect of the shank shape on the power requirements -which include the draft force, rate of fuel consumption, slippage ratio and the power loss due to slippage. The two experimental farms have been designed by the use of (RCBD) with three factors and replications. The main results of this study, The vertical shank outperformed at the first site and the inclined forward outperformed at the second site in recording the lowest requirement with their means, the 8-12 cm depth outperformed at the two sites with their means in recording the lowest power requirement, the (3.70) km/ hour speed recorded the lowest power requirement except fuel consumption at the two sites with their means, The second site (clay loam texture) outperformed records the lowest power requirements.and at the effect of interaction between the sites, shank shape, depth and speed on the studied properties the inclined forward shank at depth of (8-12) cm and at speed of (3.70) km/hour gave the lowest power requirement at the second site except fuel consumption.
Keyword: Tillage – Chisel Plow Shanks –– Power requirement
الخلاصةأجريت هذه الدراسة في الموسم (2005 – 2006) بمحافظة نينوى وفي موقعين مختلفي النسجة. الأول ذو نسجة طينية والثاني بنسجه مزيجيه طينية واستخدم في الدراسة محراث حفار بثلاثة أشكال من القصبات تم تصنيعها محليا ( عمودية ، منحرفة إلى الأمام ، مقوسة ) وبعمقي حراثة (8–12)،(13-17) سم وثلاث سرع ( 3.70 ، 7.15 ، 9.64 ) كم/ساعة بهدف دراسة تأثير شكل قصبة المحراث الحفار على متطلبات القدرة ( قوة وقدرة السحب ، معدل استهلاك الوقود ، نسبة الانزلاق ، القدرة المفقودة بالانزلاق )واستخدم تصميم القطاعات العشوائية الكامل وبثلاثة عوامل ومكررات . وكانت اهم النتائج المستحصل عليها : تفوقت القصبة العمودية في الموقع الاول ومتوسط الموقعين والمنحرفة الى الامام في الموقع الثاني في تسجيل اقل متطلبات قدرة وتفوق العمق (8–12) سم للموقعين ومتوسطهما في تسجيل اقل متطلبات قدرة كما و سجلت السرعة (3.70) كم/ساعة اقل متطلبات قدرة ماعدا استهلاك الوقود في الموقعين ومتوسطهما وتفوق الموقع الثاني ( ذو النسجة المزيجية الطينية ) في تسجيل اقل متطلبات قدرة وعند التداخل بين المواقع وشكل القصبة والعمق والسرعة فقد سجلت القصبة المنحرفة الى الامام بعمق (8-12 ) سم وسرعة (3.70 ) كم/ساعة في الموقع الثاني اقل متطلبات قدرة ما عدا استهلاك الوقود.
https://rengj.mosuljournals.com/article_44742_26a6921b2c4ca3d70d873f63ed77c527.pdf
Keyword
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2008-09-28
16
4
27
40
10.33899/rengj.2008.44743
44743
Optimal Multicrop Allocation of Seasonal Water Under Limited Irrigation Water
التخصيص الامثل للمياه الفصلية بين مجموعة محاصيل تحت محدودية توفر مياه الري
Anmar Al-Talib
1
Abdul-Sattar Al-Dabagh
2
Eman Hazim Sheet
3
Abstract
As water demand is increasing and the world food problem is becoming more pronounced، world efforts are forwarded towards the optimal usage of water resources، specially in regions where water is scare or irrigation is very costly. Inadequate irrigation is considered one of the methods that increase water usage efficiency and the application of optimization methods is essential in order to increase agriculture production.
A mathematical model was developed for optimal allocation of irrigation water under full and inadequate irrigation. The model determines the optimal seasonal allocation of irrigation water between crops. The output of the model are the area and water allocated for each crop under limited and full irrigation، the effects of various management options، as changing the plan of agriculture، type of production function، and value of irrigation water، were studied. The model was run for many percentages of full irrigation ranging from 10% to 100%. The model is considered a good approach for deciding on area and amount of irrigation water which achieves optimal values in irrigation planning projects under limited water resources.
Keywords: irrigation optimization, nonlinear programming, limited irrigation water, water allocation for different crops.
الخلاصةنظرا لزيادة الطلب على المياه وتعاظم مشكلة الغذاء العالمي فان الأنظار في جميع أنحاء العالم تتجه نحو الاستغلال الامثل للموارد المائية وخاصة في المناطق التي يكون فيها الماء محدود أو كلفة الري عالية. ويعتبر الري الناقص من الطرائق المهمة لزيادة كفاءة استخدام المياه، كما أن تطبيق طرق الامثلية أمر مهم لزيادة الإنتاج الزراعي.تم وضع أنموذج امثلية لإيجاد التخصيص الامثل للمياه والمساحات بين أربعة محاصيل بفرض وحدة مساحة (1 هكتار) وكمية مياه كلية محددة هي احتياج الري الكامل للمحاصيل الأربعة، مع وضع محددات على المساحة المزروعة بكل محصول وكمية المياه المحددة ايضا، نتائج هذا الأنموذج هي المساحات وكميات المياه المثلى للمحاصيل الأربعة. تم تشغيل الأنموذج لنسب مختلفة من كميات المياه الكلية تتراوح بين 10% إلى 100% من الري الكامل مع تغيير نوعية دالة إنتاج المحصول، الخطة الزراعية، وسعر ماء الري. تبين من تشغيل الأنموذج لحالات مختلفة أنّ امثل برمجة للري الناقص هي (60-80)% من الري الكامل، كما يعتبر الأنموذج وسيلة مناسبة لتحديد المساحات المثلى وكميات المياه المثلى لزيادة العائدات الاقتصادية.الكلمات الدالة: امثلية الارواء، البرمجة غير الخطية، محدودية توفر مياه الري، تخصيص المياه لمجموعة محاصيل
https://rengj.mosuljournals.com/article_44743_2da4e3c4f21a51fbd5a1b79916f528c2.pdf
KEYWORDS
nonlinear programming
limited irrigation water
water allocation for different crops
الكلمات الدالة
البرمجة غير الخطية
محدودية توفر مياه الري
تخصيص المياه لمجموعة محاصيل
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2008-09-28
16
4
30
37
10.33899/rengj.2008.44725
44725
Effects Of Camber Of Beam On Behavior Of Single Span Portal Frames
تأثير تحدب الجسور على سلوك الهياكل احادية الفضاء
Kanaan Sliwo Youkhanna Athuraia
1
An attempt is made to study the effect of camber on the behavior (deflection and failure load) of single span portal frames under concentrated load. Two types of cambering were used, the first by cambering both top and bottom surfaces of the beam and the second by cambering the bottom surface only (the top surface is kept leveled) which is more acceptable from point of view of uniformity of super imposed dead load distribution.
There is a considerable effectiveness of the camber on the failure load compared with straight beams (without camber). Also, there is effectiveness considering )dead+live( load deflections for cambered beams compared with straight beams.
Keyword : Membrane Action, Camber, Concentrated Load, Deflection, Failure.
تضمن البحث دراسة تأثير تقوس العتبات (نحو الأسفل) على تصرف (الأنحراف "الأود" وحمل الفشل) لهياكل حاملة أحادية الفضاء تحت تأثير حمل مركز. تم أستخدام نوعين من التقوس ، الأول بعمل التقوس للسطحين العلوي والسفلي للعتبة والثاني بعمل التقوس للسطح السفلي فقط (مع إبقاء السطح الأعلى مستوياً) والذي هو أكثر قبولا من ناحية التوزيع المنتظم للحمل الميت الأضافي. أظهرت النتائج تأثير واضح للتقوس على حمل الفشل بالمقارنة مع العتبة المستقيمة (بدون تقوس). وكذلك ظهر تأثيرالتقوس على قيم الأنحرافات تحت تأثير الحمل الميت والحي بالمقارنة مع العتبة المستقيمة.
https://rengj.mosuljournals.com/article_44725_988277ec1807f88f3439f19f50370376.pdf
Keyword
Camber
Concentrated Load
deflection
failure
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2008-09-28
16
4
38
48
10.33899/rengj.2008.44727
44727
The Use Of Liquid Asphalt To Improve Gypseous Soils
استخدام الاسفلت السائل لتحسين التربة الجبسية
This work aimed to study the effectiveness of liquid asphalt in the enhancement of gypseous soils properties. This enhancement is by reducing the effect of water on gypsum particles and increasing strength parameters.
The work included two types of treatments firstly is by mixing technique and the second type is by grouting technique.
The testing program included the determination of unconfined compressive strength, shear strength and collapsibility parameters of untreated and treated gypseous soil with different percent of liquid asphalt.
The test results showed that the maximum unconfined compressive strength and the shear strength of soil increased to an optimum value and then decreased with increasing liquid asphalt.
The study concluded that the mixing technique was better than the injection technique because the mixing technique will cover the particles with a film of asphalt while the injection fills the voids of soil with asphalt. Moreover the results show that the oblique injection gives more strength to the soil than normal injection.
Keywords: Gypseous soil, Liquid asphalt, Soil improvement, Grouting, Injection
الخلاصةان الهدف الرئيسي من هذه العمل هو دراسة تأثير الإسفلت السائل (cut-back RC-70) في تحسين خواص التربة الجبسية. حيث هذا التحسين يكمن في تقليل تأثير الماء على حبيبات الجبس المتواجدة في التربة والتي تعمل كمادة رابطة في التربة وكذلك في زيادة مقاومة التربة الجبسية.في هذا العمل تم اجراء نوعين من المعالجة النوع الاول المعالجة بواسطة الخلط اليدوي والنوع الثاني المعالجة بواسطة الحقن.تضمنت الدراسة اجراء فحص مقاومة الانضغاط غير المحصور وكذلك أجراء فحص القص المباشر لايجاد تماسك التربة وزاوية الاحتكاك الداخلي لها واخيرا" فحص الانهيارية. حيث أجريت جميع هذه الفحوصات للترب غير المعالجة والمعالجة بنسب مختلفة من الإسفلت في حالة الجفاف وحالة الغمر بالماء. اوضحت النتائج ان مقاومة الانضغاط غير المحصور للتربة تزداد قيمتها (حوالي 33%) عند النسبة المثلى للمعالجة وهي (6%) ومن ثم تتناقص بزيادة محتوى الاسفلت. كذلك فان تماسك التربة يزداد بزيادة محتوى الاسفلت الى القيمة العظمى و من ثم تتناقص بزيادة محتوى الاسفلت. عند غمر التربة بالماء لوحظ تناقص قيم الانضغاط غير المحصور و كذلك تماسك التربة. كما بينت النتائج ان الحقن المائل تفضل من الحقن العمودي.استنتج من هذه الدراسة انه طريقة الخلط اليدوي للسفلت مع التربة افضل من طريقة الحقن بسبب كونها طريقة مثالية حيث يتم تغطية حبيبات التربة بطبقة قليلة من الاسفلت في حين ان طريقة الحقن يتم فيها ملء فجواة التربة بالاسفلت
https://rengj.mosuljournals.com/article_44727_93e59d8265fbfea83f5eda8324d0b364.pdf
KEYWORDS
Liquid asphalt
Soil improvement
Grouting
injection
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2008-09-28
16
4
41
52
10.33899/rengj.2008.44744
44744
Study for the Quality of the Ground Water in Meshraq -1
دراسة نوعية المياه الجوفية في حقل المشراق/1
Gada Younis Abdullah AL-Ubaidy
1
The study of chemical, physical characteristic of the ground water is important to determine the suitability of this water for drinking or irrigation and agriculture uses. The study of ground water in Meshraq-1 is so is important for this area from economic power live. Eight wells had been chosen for this study. Results of these tests show that the ground water in Meshraq-1 law quality, due to industrial hot water pumping may cause this deterioration of water especially SO4-2 will reach (177-1771) p.p.m for the first test and (169-1570) p.p.m for the second test, CO3-2 and HCO3- so this ground water will deteriorate the river.
Key words: ground water – meshraq – quality of ground water – pollution of water.
الخلاصةتم تحديد الصفات الكيميائية والفيزيائية للمياه الجوفية في حقل كبريت المشراق /1 وذلك لبيان مدى صلاحيتها لمختلف الاستخدامات المنزلية والزراعية والصناعية ، ولأهمية حقل كبريت المشراق من الناحية الاقتصادية وما يسببه من مشاكل كالتلوث البيئي ، فقد تم اختيار ثمانية من آبار المراقبة الموجودة في منطقة الدراسة . أخذت النماذج على مرحلتين الأولى في بداية شهر كانون الأول عام 2002 و الثانية في نهاية شهر آذار عام 2003 وكان عدد النماذج المأخوذة 32 نموذجاً وعلى عمقين مختلفين من سطح الماء في كل بئر، وأجريت عليها الفحوصات اللازمة وكما تم رسم الخرائط الكنتورية التي تبين توزيع ايونات الكبريتات والكربونات والبيكربونات و التوصيلية الكهربائية والأس الهيدروجيني ودرجة الحرارة . و تبين أن المياه الجوفية في هذه المنطقة قاعدية و عالية الملوحة بسبب الزيادة في تركيز الأملاح وخاصة ايون الكبريتات وكانت مابين (177-1771) جزء بالمليون للفحص الأول و(169- 1570) جزء بالمليون للفحص الثاني, وكذلك ايونات الكربونات والبيكربونات وكانت أعلى التراكيز في الآبار w3 وw4 و w5 القريبة من الآبار المنتجة للكبريت وذلك بسبب مطروحات حقل كبريت المشراق ، والتي بدورها تتحرك إلى المياه الجوفية والتي تتجه نحو نهر دجلة مسببة تلوثه بأملاح الكبريتات إضافة إلى التلوث الحراري الناتج من المياه الحارة المحقونة في آبار إنتاج الكبريت .الكلمات الدالة : المياه الجوفية – المشراق – نوعية المياه الجوفية – تلوث المياه .
https://rengj.mosuljournals.com/article_44744_8bcd5e559346155a44152724e42db529.pdf
Key Words
الكلمات الدالة
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2008-09-28
16
4
49
58
10.33899/rengj.2008.44730
44730
Complexity Reduction and Performance Improvement of Multistage Detector with Parallel Interference Cancellation for DS-CDMA System
تقليل التعقيد وتحسين الأداء لكاشف متعدد المراحل مع إلغاء التداخل المتوازي لأنظمة الوصول المتعدد بتقسيم الشفرة
Sedki. B. T. Younis
1
Bayez K. Al-Sulaifanie
2
Abstract
In this paper we propose a new method which combines the partial cancellation and differencing technique to achieve performance improvement and reduction in complexity, the proposed technique is named Multistage (DP-PIC) Detector. The simulation model for the proposed DP-PIC is implemented in floating and fixed point arithmetic. The simulation results illustrates that a partial cancellation factor of 0.7 and 0.8 in the first and second stage respectively gives a good performance for the proposed technique. A precision of 16-bit is enough to achieve a small performance degradation compared to floating point results. Finally the proposed fixed point DP-PIC is implemented on TMS320C6400 DSP simulator. The implementation results illustrate that 35% complexity reduction can be achieved compared with conventional PIC detection.
Keywords: DS-CDMA, PIC, Complexity reduction, performance improvement.
الخلاصةفي هذا البحث تم اقتراح نموذج لكاشف متعدد المراحل يستخدم خوارزمية إزالة التداخل المتوازية المحسنة مع استخدام متجه الفرق وذلك للحصول على أداء جيد مع تقليل بتعقيد الخوارزمية، وقد تم بناء نموذج لهذه الخوارزمية يعمل بحسابات الفاصلة الثابتة. لقد أظهرت نتائج المحاكاة مدى التحسن الذي يطرأ على أداء النظام عند استخدام تقنيات الكشف بتعدد المستخدمين. إن تقييم الأداء للخوارزمية المقترحة اظهر أن عامل إزالة جزئية بمقدار 0.7 في المرحلة الأولى و0.8 في المرحلة الثانية أعطت أفضل نتائج لهذه الخوارزمية. وقد أظهرت نتائج المحاكاة بالفاصلة الثابتة إن دقة 16-bit تكون كافية لهذه الخوارزمية مقارنة مع حسابات الفاصلة العائمة.
https://rengj.mosuljournals.com/article_44730_0c82d110c2884733623d77b1f98aa86b.pdf
KEYWORDS
CDMA
PIC
Complexity reduction
performance improvement
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2008-09-28
16
4
53
60
10.33899/rengj.2008.44745
44745
Dual Irrigation Technology (DIT) Under Surface Irrigation System
تقنية الري الثنائي تحت ظروف الري السطحي
Abbod M. Aljumaily
1
Isam M. Alhadithy
2
In the dual irrigation technology (DIT), irrigation process is divided into two stages. In the first stage saline water is added as a part of irrigation water requirements , then good quality irrigation water is supplied in the second stage to complete irrigation water requirements. Piston flow may accurse in the soil because the time interval between two stages as short as possible , so the water content is greater than field capacity . Piston flow leaches the saline water that used in the firs stage of (DIT) under the root zone depth, so it is minimize the salinity effects of that water. Drainage water of 6 ds/m and Euphrates river water (1ds/m) are used to irrigate corn under furrow irrigation system with (DIT) at Ramady city in Iraq. Advance face in the furrow completes from drainage water , then second stage of (DIT) using river water . The experiment results summarized in the high relative yield (more than 95%) and saving about third quantity of fresh irrigation water. No significant differences in the salinity effects at the upper two thirds of the root zone depth compared with some furrows irrigated by river water only . Salinity effects at the lower third decrease as the distance from the upstream of the furrow increase, logarithmic relation between salinity effect and furrow length is proposed
Key words: Dual Irrigation , saline irrigation water , water quality
الخلاصةابتكر مؤخرا نظام الري الثنائي المتمثل بتجزئة عملية الري إلى مرحلتين , حيث يتم تجهيز الحقل بمياه مالحة لتغطية جزء محسوب من احتياجات ماء الري في المرحلة الأولى , ثم يبدأ تنفيذ المرحلة الثانية بعد الانتهاء من المرحلة الأولى مباشرة لإتمام احتياجات الري بمياه مصدر الماء المتوفر , وحيث أن الفترة الزمنية بين المرحلتين تكون أقل ما يمكن , لذا يتوقع حصول جريان مكبسي يسهم بإزاحة المياه المالحة المستخدمة في المرحلة الأولى إلى أسفل المنطقة الجذرية. يتناول البحث الحالي استخدام هذا النظام لري محصول الذرة الصفراء بطريقة الري بالمروز . أجريت التجربة في مدينة الرمادي بالقرب من مجرى نهر الفرات , حيث استخدمت مياه بزل متوسط ملوحتها ( 6 ) دسي سيمنز/م لإتمام طور التقدم , تبعتها المرحلة الثانية بالري من نهر الفرات ومتوسـط ملوحته (1) دسي سيمنز/م لإتمام احتياجات الري المتبقية . كما نفذت معاملات للمقارنة تروى بمياه عذبة فقط . يخلص البحث إلى إمكانية توفير ثلث احتياجات ماء الري باستخدام تقنية الري الثنائي دونما حصول تأثير يذكر على الإنتاج بالقياس بمعاملات المقارنة ,حيث كان الإنتاج أكبر من 95%, كما لوحظ وجود علاقة لوغارتمية بين طول مضمار الري وتأثر الثلث الأسفل للمنطقة الجذرية بالملوحة . الكلمات الدالة: ري ثنائي , الري بمياه مالحة , نوعية مياه الري
https://rengj.mosuljournals.com/article_44745_13998324ec21f6ea0a6ff28d5fa7ef83.pdf
Key Words
saline irrigation water
Water quality
الكلمات الدالة
الري بمياه مالحة
نوعية مياه الري
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2008-09-28
16
4
59
68
10.33899/rengj.2008.44732
44732
Estimation of Design Parameters for Cellular WCDMA Network
تقدير معالم التصميم لشبكة اتصالات خلوية نوع WCDMA
S. A. Mawjoud
1
Abstract
The estimation of design parameters for WCDMA network which support different data rate (Multimedia) services is an essential step in network planning. The estimated parameters includes: Cell coverage range using path loss propagation model, average and maximum path loss, throughput, capacity / km2, number of users per cells blocking capacity, tracking efficiency. The parameters are computed for different data rates.
Key words: WCDMA, noise rise, load factors.
إن تقدير معالم التصميم لنظم WCDM هي من الأولويات لتصميم شبكة قادرة على نقل بيانات مختلفة المعدل تمثل الصوت أو الصورة. وتشمل المعالم ( مدى تغطية الخلية باستخدام نموذج فقد المسار المناسب ، معدل فقد المسار وأقصى فقد للمسار ، الإخراج ، السعة لكل كيلومتر مربع ، عدد المستخدمين في الخلية ، سعة الصد ، وكفاءة النقل الرئيسي البعيد.
https://rengj.mosuljournals.com/article_44732_7c67dd79a968eab0fb2f3b171bd082ec.pdf
Key Words
noise rise
load factors
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2008-09-28
16
4
61
85
10.33899/rengj.2008.44746
44746
Nasma Maan M. Thabit
توظـيف الـرمـز الضمـني فـي عمــارة المـوصـــل
Nasma Maan M. Thabit
1
Abstract
Architecture is considered as a language during he last four decades, contemporary studies had presented this trend through different approaches which delt primarily with meaning and signs as semantic expressions in all events. In Mosul, it has emerged in reactions concentrating on architecture relating to continuity and links with social structures which represent the vessel that contains human culture. Hence, there was a strong need to verify various methods and strategies that extent the space surrounding continuity context.
The paper discusses the importance of utilization of implicit symbol concentrating on the architectural reality, in order to explore the particular problem which has been represented as lack of clarity of utilization of implicit symbol in Mosul architecture. Thus, the objective of the paper has been formed and method has been specifies by building theoretical framework consisting of four main items of detailed theoretical field as the following: (what implicit symbol is?, implicit symbol utilization, implicit symbol characteristics and implicit symbol aims). Specify utilization of implicit symbol in architecture firstly, then the application of one of the main items (implicit symbol creation utilization) trends through Mosul architecture secondly, concluding the forms of implicit symbol thirdly.
Finally, conclusions have declared the importance of the role of utilization of implicit symbol in works of Mosul architecture by using many strategies.
Key words: utilization of implicit symbol, Mosul Architecture
الخلاصةالعمارة كلغة موضوع برز في العقود الأربعة الأخيرة، وركزت عليه الدراسات المعمارية المعاصرة بأساليب مختلفة ارتبطت أحياناً بالمعاني المعبر عنها، وبأساليب التعبير أحياناً أخرى، وكلاهما يصب في قناة إثراء النتاج المعماري، وفي الموصل ظهرت ردود الفعل المطالبة بعمارة تتسم بالإيصال والتواصل مع البيئة المجتمعية، التي تمثل الإناء الحاوي للنتاج الإنساني الحضاري منه والمعماري، مما استدعى التوجه نحو مجموعة من الآليات والاستراتيجيات التي توسع فضاءات السياقات التواصلية كتوظيف الرمز الضمني التي تفاعلت مع مؤشر مهم في التعاملات الإيمائية والتعبيرية، يناقش البحث أهمية المفهوم وحقيقة المعرفة المطروحة عنه في الواقع المعماري لاستخلاص المشكلة الخاصة بالبحث المتمثلة بغموض المعرفة حول التصور النظري لتوظيف الرمز الضمني وصيغه في عمارة الموصل، وأفرز تقويم عدد من الدراسات المعمارية التي طرحت معرفة نظرية متخصصة حول الموضوع، عن تحديد النقص المعرفي ضمن النظرية المعمارية حول هذا المفهوم، وبذلك تبلورت مشكلة البحث وتحدد هدفه ومنهجه متمثلاً ببناء إطار نظري شامل يضم أربع مفردات رئيسية (شملت كل من مفردة ماهية الرمز الضمني ومفردة صيغ توظيف الرمز الضمني ومفردة خصائص الرمز الضمني ومفردة أهداف الرمز الضمني) تم اختبار فرضيات البحث المتمثلة بالتحري عن إمكانية توظيف المفهوم باعتماد هذه المفردات فضلاً عن التحري عن إمكانية وجود أنماط معينة لتوظيف المفهوم في العمارة أولاً ثم تطبيق إحدى المفردات الرئيسية والمتمثلة بـ (مفردة صيغ توظيف الرمز الضمني) على نتاجات معمارية منتخبة ضمن عمارة الموصل ثانياً، ثم استخلاص هذه الصيغ للتوظيف ثالثاً، وقد أوضحت الاستنتاجات ميل المعماريين الموصليين لتحقيق صيغ معينة لتوظيف الرمز الضمني في نتاجاتهم على مستوى المضمون والشكل باستثمار إجراءات معالجة محددة لتحقيق هذا الهدف
https://rengj.mosuljournals.com/article_44746_dfc2f09e5fecf551019af88ab801eb1a.pdf
Key Words
Mosul architecture
الكلمات الدالة
عمارة الموصل
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2008-09-28
16
4
69
79
10.33899/rengj.2008.44733
44733
Performance Improvement Of Cellular Systems Using MIMO-OFDM
تحسين أداء أنظمة الاتصالات الخلوية باستخدام MIMO-OFDM
S. A. Mawjoud
1
W. M. Abdul-Latef
2
The combination of multiple-input multiple-output (MIMO) system with OFDM techniques is regarded as a promising solution for enhancing the data rates of next-generation wireless communication systems.
SDM is implemented to transmitted different signals simultaneously at the same carrier frequency and to detect the transmitted signals using many techniques such as zero frequency, minimum mean square error with and without decision feedback and maximum likelihood decoding.
Furthermore, orthogonal frequency division multiplexing technique included in the simulation process using the parameters of the IEEE 802.11a standard. The fading channel is modeled by exponentially – decayed Rayleigh fading channel which is based on the indoor WLAN, Least Square (LS) method is used to estimate the channel for each subcarrier.
Keyword: WCDMA, MIMO-OFDM.
الخلاصةإن الجمع بين الأنظمة متعددة الإدخال متعددة الإخراج مع تقنية الوصول المتعدد للتردد المتعامد يعتبر الحل الأمثل لزيادة معدل إرسال البيانات في الجيل القادم من أنظمة الاتصالات اللاسلكية.تم استخدام تقسيم المسافة الزمني لإرسال عدد من الإشارات آنيا بنفس تردد الحاملة من هوائيات عدة ، وللكشف عن الإشارة تم استخدام أكثر من تقنية مثل تقنية إزالة التداخل وتقنية معدل مربع الخطأ الأقل مع التغذية العكسية وبدونها فضلاً عن تقنية الكشف بأكبر احتمالية.بعد ذلك أضيفت تقنية الوصول المتعدد للتردد المتعامد إلى محاكاة النظام واستخدمت المتغيرات المعتمدة من قبل IEEE 802.11a ، كما تم تمثيل خفوت القناة بخفوت قناة رايلي ذات تضاؤل أسي وهو النموذج المعتمد للشبكة المحلية اللاسلكية (WLAN) داخل الأبنية ، ولتخمين القناة لكل تردد من ترددات الحاملة الفرعية استخدمت طريقة مخمن التربيع الأقل (LS) .
https://rengj.mosuljournals.com/article_44733_e7b64328eaa96ace58d5f55c755d731e.pdf
Keyword
MIMO
OFDM
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2008-09-28
16
4
80
92
10.33899/rengj.2008.44735
44735
Fpga Design And Implementation Of A Scan Conversion Graphical Sub-System
تنفيذ وتصميم وحدة تحويل مسح كمنظومة رسم فرعية باستخدام البوابات المبرمجة حقليا
Amar I. Dawod
1
Fakhraldeen H. Ali
2
Abstract
One Major modeling primitive in the field of Computer Graphics is a planar polygon. This polygon can have an arbitrary number of vertices and different shapes. In this paper a graphic sub-system is designed and implemented using Field Programmable Gate Array
( FPGA ). One of the main tasks of the hardware designed is scan-converting convex planar polygons required to update an image in the image memory or video RAM which is used as a Frame Buffer. A facility to read the pixels (Picture Elements), from the frame buffer, for display on the monitor of the computer is also included in the design.
Keywords: frame buffer, scan-conversion, polygons, pixels, FPGA
إن احد أهم الأشكال الأساسية في مجال الرسم باستخدام الحاسوب هو المضلع المستوي. هذا المضلّع يُمكن أَن يَأخُذ عدداً عشوائياً من الرؤوس وأشكال مختلفة. في هذا البحث تم تصميم و تنفيذ منظومة رسم فرعية باستخدام البوابات القابلة للبرمجة حقلياً. إحدى المهامِ الرئيسية للكيان المادي المُنفذ هو تحويل المسح للمضلعات المستوية و خزنها في ذاكرة الصورة من اجل إجراء عملية التحديث. كما تضمن التصميم إمكانية القراءة للنقاط الصورية (عناصر الصورة) من ذاكرة الصورة وعرضها على شاشة الحاسوب.
https://rengj.mosuljournals.com/article_44735_317f51a866bac7854b88a953429093d2.pdf
KEYWORDS
scan
conversion
polygons
pixels
FPGA
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2008-09-28
16
4
93
102
10.33899/rengj.2008.44737
44737
A Pipelined Fault Tolerant Architecture for Real time DSP Applications
معمارية الخط الإنتاجي متسامحة الأخطاء لتطبيقات معالجة الإشارة الرقمية
Ahmad Falih Mahmood
1
Abstract
This paper presents a new, expandable, pipelined linear array architecture designed for transparently tolerating processor failures for real-time DSP applications. The proposed system use twelve TMS320C40 DSP processors ( Processor Modules PMs ) to construct ten stages pipelined system with two spare processors (SPs). However, the system can be expanded to increase the pipeline stages and the performance, and adding more spare processors to increase the dependability and reliability of the system. In Proposed scheme, the system can automatically reconfigure itself in the event of failure in one or two of its DSP processors and the computations continue unhindered without noticeable performance degradation. Each DSP processor communicates with neighboring processors through a high speed communication ports ( commport ). Some of these commports in every processor are used as a bypass links in case of failure of one or two processors. The system uses the forward-task-shift (FTS) mechanism to tolerate the fault by assigning the function of the failed processor to the next fault-free processor.
Keywords- Linear processor array, fault tolerant, bypass links, pipelining, TMS320C40, DSP processors.
الخلاصة يُبين هذا البحث معمارية مصفوفة خطيّةِ لمعالجات الإشارة الرقمية, جديدة وقابلة للتوسيع صمّمتْ لتتَحَمُّل حالاتِ عطل المعالج لتطبيقاتِ معالجة الإشارة الرقمية في الزمن الحقيقي. النظامِ المُقتَرَحِ يستعمل اثنا عشرَ معالج إشارة رقمية نوع TMS320C40 لبناء نظام خط إنتاجي ذو عشْرة مراحلَ بمعالجين احتياطيين.على أية حال، النظام يُمْكِنُ أَنْ يُوسّعَ لزيَاْدَة مراحلِ الخط الإنتاجي وتحسين الأداء َوكذلك زيادة المعالجات الاحتياطيةً لزيَاْدَة الاعتمادية و المَوثُوقِيِّةِ النظامِ. في المخططِ المُقتَرَحِ، يمكن للنظام اعادة تشكيل نفسه آلياً في حالة حدوث عطلِ في واحد واثنان من معالجاتِ الإشارة الرقمية المستخدمة وان تستمر عمليات المعالجة دون انخفاض ملحوظ في الأداء. يَتّصلُ كُلّ معالج إشارة رقمية بالمعالجات المُجَاوَرَة عن طريق موانئ إتصال ذات سرعةِ قسم من هذه الموانئ تستخدم كوصلات عبور بين المعالجات في حالة حدوث عطل في واحد واثنان من معالجات النظام. يَستعمل النظام آلية لتجاوز الأعطال سميت باّلية إزاحة المهمة للإمام وذلك بتَخصيص مهمة المعالجِ ألعاطلِ إلى ألمعالجِ خالي مِنْ ألعطل التالي.
https://rengj.mosuljournals.com/article_44737_970ae2962553b527d25d81dba76e7d27.pdf
KEYWORDS
Linear processor array
fault tolerant
bypass links
Pipelining
TMS
DSP processors