eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2012-12-28
20
6
1
17
10.33899/rengj.2012.63332
63332
Nonlinear Analysis of Reinforced Concrete Thick Plates Under Effect of RepeatedLoading and Cyclic Heating
التحلیل غیر الخطی للصفائح الخرسانیة المسلحة السمیکة تحت تأثیر الأحمال التکراریة والتسخین الدوری
Dr.A. H.AHMAD
1
H.ِA. AL Jarjery
2
Abstract This study includes the effect of cyclic heating and repeated loading on the behavior of reinforced concrete thick plates by using mathematical models to represent the effect of cyclic heating on mechanical properties of concrete and steel, and other models to represent the behavior of both concrete and steel underth effect of cyclic loads. Plate thickness has been divided into several layers; steel was represented as an equivalent concrete layer. The material properties in each layer of the plate thickness are evaluated according to its temperature. One dimensional heat equation has been used to describe heat distribution through the layers Reissener’s theory that account for shear strain and transfer of shear forces and assumes that stress distribution across plate thickness is linear has been used to analyze the plates. The finite difference method and dynamic relaxation technique are used to calculate the stress and strain in the plate; also modified increment method is used to represent stress-strain nonlinear relationship. Reinforced concrete plates have been analyzed in the ordinary temperature and after heating and cooling for three different temperatures (200,400,600)˚C withdifferent Cyclic Loading of (1,2,3,4) cycles . Keywords: Nonlinear analysis, Reinforced concrete, Thick plates, Repeated load, High Temperature.
الخلاصةتشمل هذه الدراسة تأثیر التسخین الدوری والأحمال التکراریةفی السلوک ألإنشائی للصفائح الخراسانیة المسلحة السمیکة وذلک بإستعمال نموذج ریاضییمثل تأثیر التسخین المتناوب فیالخصائص المیکانیکیةلکل من الخرسانة وحدید التسلیح تحت تأثیر الأحمال الدوریة. تم تقسیم سمک الصفیحة إلى عدد من الشرائح و تمثیل حدید التسلیح بما یکافئشریحةخرسا نیة وذلک لتمثیل التغییر فی خصائص المواد المستخدمة ضمن سمک الصفیحة.تم حساب التغییر فی خصائص کل شریحة وحسب درجة الحرارة الخاصة بها. وقد إستعملت معادلة الإنتشار الحراری بإتجاه سمک الصفیحة فی تحدبد درجة الحرارة فی کل شریحة..کما تم اعتماد طریقة) (Reisssner للصفائح السمیکة التی تأخذ بنظر الاعتبار اجهادات قوى القص وانفعالاتها وتفترض ان توزیع الاجهادات یکون على نحو خطی ضمن سمک الصفیحة لحساب الاجهادات والانفعالات فی الصفیحة, کما استخدمت طریقة الفروقات المحددة وتقنیة الاسترخاء الحرکی والطریقة المعدلة للزیادات المحددة لتمثیل علاقة (الاجهاد – الانفعال) غیر الخطیة.تمتحلیل الصفیحة الخرسانیة المسلحة تعریضها الى(4,3,2,1) من دورات التسخین والتبرید ولثلاثة مستویات حراریة هی˚C (600,400,200) وعدد دورات التحمیل .
https://rengj.mosuljournals.com/article_63332_a69ec5488e94bc8a91f3244d5bf06b98.pdf
KEYWORDS
reinforced concrete
Thick plates
repeated load
high temperature
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2012-12-28
20
6
1
14
10.33899/rengj.2012.63362
63362
Analysis and Simulation of Single Phase Inverter Controlled By Neural Network
تحليل وتمثيل مغير أحادي الطور مسيطر عليه باستخدام الشبكة العصبية
Abdul Kareem Z. Mansoor
1
Ahmed G. Abdullah
2
ABSTRACT
This paper presents the analyses and design of Neural Network (NN) control of a single phase voltage source inverter with an L-C filter using only voltage sensor. A multiple feedback loop PI(Proportional-Integral) controller for PWM (pulse width modulation) inverter is built by root-locus method then simulated using Matlab (Simulink). The proposed NN is traind off-line using the patterns obtained from the simulated inverter with multiple loop PI (Proportional-Integral) controllers. Simulation results show that the proposed NN control can achieve low total harmonic distortion under linear loading condition, small steady state error and good dynamic response under any disturbance change in load. A hardware single phase inverter with programmed pulse width modulation control based on microcontroller is built and implemented with resistive load.
المستخلصفي هذا البحث تحليل وتصميمَ مسيطر مغلق الدارة ذو متحسس فولتية فقط باستخدام الشبكة العصبية الاصطناعية (ANN) لمغير احادي الطور((single phase inverter ذو مصدر فولتية ومرشح حثي سعوي (L-C). مسيطر مزدوج الدارة (PI controller) لمغير تضمين عرض النبضة بني باستخدام ال(Root locus) وحوكي باستخدام برنامج MATLAB (SIMULINK) , دربت الشبكة العصبية المقترحة تدريب من نوع مقطوع الاتصال (off line) باستخدام عينات تدريب تم الحصول عليها من محاكاة مغير تضمين عرض النبضة مع المسيطر المزدوج الدارة ((PI controller. نتائج المحاكاة بينت أن مسيطر الشبكة العصبية المقترح أعطى تشوهات قليلة جدا, نسبة خطا قليل في الحالة المستقرة واستجابة ديناميكية جيدة تحت أي اضطراب يغير الحمل. للتحقق من نتائج الشبكة العصبية تم تمثيل جهاز مغير مختبريا باستخدام تضمين عرض النبضة المبرمج مبني على مسيطر دقيق(microcontroller).
https://rengj.mosuljournals.com/article_63362_bba37e626f07f39eee82982f70fd671d.pdf
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2012-12-28
20
6
15
22
10.33899/rengj.2012.63377
63377
Short term electrical load forecasting using holt-winters method
توقعات الأحمال الكهربائية للمدى القصير باستخدام طريقة هولت ونتر
Dr. Majed Saleh Al-Hafid
1
Ghazi Hussein Al-maamary
2
Abstract
Load forecasting is a process of predicting the future load demands. It is important for electrical power system planners and demand controllers in ensuring that there would be enough supply of electricity to cope with increasing demands. Thus, accurate load forecasting can lead to an overall reduction of cost, better budget planning, maintenance scheduling and fuel management. Therefore this study aimed to develop new forecasting model for forecasting electricity load demand which will minimize the error of forecasting. This paper presents an attempt to forecast the daily peakdemand of electricity by using an appropriate time series model. It is the Seasonal Holt-Winters method. The performance of this method was evaluated by using theforecasting accuracy criteria namely, the Absolute Percentage Error (APE) and the Mean Absolute Percentage Error (MAPE). Based on these criteria the Holt-Winters method emerged as a suitable model for forecasting electricitydemandin Iraq.
الخلاصـة:توقعات الأحمال هي عملية تخمين الأحمال المستقبلية, وهي مهمة بالنسبة لمخططي نظام القدرة والمسيطرين على متطلبات الأحمال للتأكد من أن هناك كمية كافية من التوليد لمواكبة الزيادة في الطلب. إن النموذج الدقيق من التوقعات الأحمال يقود إلى تقليل الكلفة وأفضل تخطيط للميزانية والمحافظة على جدولة التشغيل وإدارة الوقود. لذلك سعت هذه الدراسة إلى استخدام نموذج توقع جديد لتوقع الحمل الكهربائي الذي سيقلل من الأخطاء في عملية التوقع.تم في هذا البحث استخدام نموذج لتوقع أقصى حمل كهربائي يومي باستخدام نموذج سلسلة زمنية مناسب, وهو طريقة هولت ونتر الموسمية. تم تقييم أداء هذه الطريقة باستخدام إحدى مقاييس دقة التوقعوهونسبة الخطأ المطلقة ومتوسط نسبة الخطأ المطلقة. اعتمادا على هذه القياسات اتضح أن هذه الطريقة مناسبة لتوقعات الأحمال الكهربائية في العراق.
https://rengj.mosuljournals.com/article_63377_a36c9cfe10550e468bf57fff86a1c6f6.pdf
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2012-12-28
20
6
18
29
10.33899/rengj.2012.63358
63358
Shear Transfer between Precast Normal Concrete and Self Compacting Concrete through the Interface Surface
انتقال القص بین الخرسانة الاعتیادیة المسبقة الصب والخرسانة ذاتیة الرص عبر المنطقة البینیة
Janan Rasheed Al-Feel
1
Ragad Subhi
2
Abstract When cast two different types of concrete in the structures or cast new concrete over old concrete it should be act monolithically. As the load applied a shear force between them will cause slip, so treatment or connectors should be used on the interface. The self compacting concrete (SCC) used widely due to its good properties as spreading and passing ability through congested reinforcement. The aim of the present research is to study the shear transfer between precast normal concrete and self compacting concrete by using several methods for surface treatment such as shear-key, sand-blast, chipping or using steel stirrups. And also to study the effect of the compressive strength on the shear force is carried out.The results were shown that the best treatment method of the interface surface to get high shear force and less slip is the sand-blast or using two 6mm reinforcement, and the compressive strength of SCC and normal concrete were enhancethe shear force.
الخلاصةعند صب طبقتین من الخرسانة فی المنشأت او عند صب خرسانة قدیمة فوق خرسانة جدیدةیتوجب سلوک متجانس للطبقین .وقد تتولد قوة القص بین الطبقتینفی السطح البینی عند تسلیط الاحمال مما یسبب الانزلاق لذلک تستخدم الرابطات لمنع هذا الانزلاق او معالجة السطح البینی.لقد زاد استخدام الخرسانة ذاتیة الرص لما لها میزات جیدة کالانتشار والجریان داخل القالب ذات التسلیح الکثیف والمقاطع الضیقة.ان الهدف من البحث هودراسة انتقال قوة القص بین الخرسانة الاعتیادیة المسبقة الصب والخرسانة ذاتیة الرص باستخدام عدة طرق لمعالجة السطح البینی منها عمل مفتاح القص,الضرب بالرمل,التنقیر او استخدام حلقات تسلیح فی السطح البینی الاملس باقطار مختلفة,وکذلک دراسة تاثیر مقاومة الانضغاط لکل من الخرسانة الاعتیادیة والخرسانة ذاتیة الرص على قیمة قوة القص.أظهرت النتائج أنأفضل طریقة لمعالجة السطح البینی للحصول على اعظم قوة قص واقل انزلاق هی الضرب بالرمل او استخدام حلقتین تسلیح بقطرmm6، وان مقاومة الانضغاط للخرسانة ذاتیة الرص والخرسانة الاعتیادیة لهما تاثیر على قیمة قوة القص.
https://rengj.mosuljournals.com/article_63358_a47c6a882e1425f78a8a91cbe6c2b3a0.pdf
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2012-12-28
20
6
23
28
10.33899/rengj.2012.63378
63378
Fabrication and Study of Memory Cell Switching Properties Based on Cu2S Compound
تصنيع ودراسة خواص المفتاحية لخلية ذاكرة خزن مبنية على المركب Cu2S
Dr. Khalid Khaleel Mohammad
1
Faris Hassan Taha
2
Abstract
A variety of materials having large non-volatile resistance change has been studied as potential candidates for next generation of non-volatile memory devices, in this device, information is stored as a change in resistance due to the formation of the metallic filament via the reduction of metal ions in the solid electrolyte. Key attributes are low voltage, low current, rapid write and erase, good retention and endurance, and the ability for the storage cells to be physically scaled to a few tens of nm.This paper presents experimental results for solid state devices based on copper sulfide ( Cu2S ) I-V characteristics.
Keywords: Cu2S memory cell, non-volatile memory
في هذا البحث تم اختبار مادة كبريتيد النحاس عن طريق تسليط جهد كهربائي عبر طرفي قطبين بينهما مادة كبريتيد النحاس, حيث يتم تغيير طور المادة من البلورية الى الحالة غير المتبلورة وبالتالي تغير مقاومة توصيل المادة. حيث يتم عملية الخزن عن طريق قياس مقاومة التوصيل للمادة, حيث يمكن الحصول من هذه المواد على خلايا خزن ذات فولتية قليلة وسرعة اداء عالية واستهلاك قدرة قليلة مع ثبات بالخواص مقارنة مع الانواع التقليدية لخلايا الخزن.
https://rengj.mosuljournals.com/article_63378_3a84569e1d65a38ebdc35b2bbbafd227.pdf
KEYWORDS
non
volatile memory
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2012-12-28
20
6
29
39
10.33899/rengj.2012.63385
63385
Design and Implementation of Doherty Power Amplifier of Global System Mobile (GSM) of Base station
تصميم وتمثيل مكبر قدرة نوع DOHERTY لتطبيقات المحطات الرئيسة لأنظمة الاتصالات المحمولة
Dr. Saad A. AL Kazzaz
1
Kahlan. H. Hamid
2
Abstract
Power amplifier is the main component of wireless communication system. This paper presentsthe efficiency improvement of linear Power amplifier for GSM base station using Doherty Power Amplifier (DPA). ADPA operating at 900 MHz and a supply voltage of (2.5-3)V. The DPA is a combination of a carrier amplifier biased to class AB mode and a peaking amplifier biased to class C mode. Each amplifier was design by GaAs FET using advance design system software package (ADS). The simulation results of DPA are compared with class AB power amplifier that ashow improvement in power added efficiency at output power with acceptable power gain.
Keywords:Doherty Power Amplifier, GaAs FET,Efficiency, GSM,ADS software.
ألملخصيعد مكبر القدرة من الأجزاء المهمة في أنظمة الاتصالات اللاسلكية .في هذا العمل تم تحسين الكفاءة لمكبر القدرة الخطي في المحطات الرئيسة لأنظمة الاتصالات المتنقلة (GSM) باستخدام مكبر القدرة نوعDoherty . يعمل مكبر القدرةDoherty بتردد مقداره (900MHz) والفولتية المجهزة تتراوح ما بين (3-3.6V).يتألف مكبر القدرة نوع Doherty من مكبرين، الأول يطلق عليه المكبر الأساس والثاني المكبر المساعد ويربط المكبرين بمحول ربع طول الموجة وغالبا ما يكون المكبر الأساس صنف AB في حين يكون المكبر المساعد صنف C. حيث تم بناء كل من المكبر الأساس والمساعد بواسطة ترانزستور GaAs FET باستخدام برنامج نظام التصميم المتقدم (ADS).اظهرت نتائج المحاكاة كفاءة قدرة إضافية عالية عند قدرة الاخراج مع كسب مناسب بالنسبة لمكبر القدرة Doherty مقارنة مع مكبر القدرة صنف AB
https://rengj.mosuljournals.com/article_63385_1d9758c56e8094b0d6e18114edc185ae.pdf
KEYWORDS
GaAs FET
Efficiency
GSM
ADS software
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2012-12-28
20
6
30
49
10.33899/rengj.2012.63360
63360
Colors (Their Positions& meanings) in Islamic Architecture
الألوان (مواقعها ومعانيها) في العمارة الإسلامية
Dr. Ahmad Abdulwahid Thannoon
1
Colors are considered to be one of the complementary design elements in the process of architectural design of any building. Itcontributes in the presentation of the final and overall picture of the work which the designer intends to convey to the recipient.Islamic architecture was characterized by the distinguished use of colors which took part in achieving access to architectural models that have a high expressive abilityin delivering different interpretations to the recipients.
In order to make use of the architectural and aesthetic heritage of colors in Islamic architecture, the details of using colors in Islamic architecture must be clear to be a guide for contemporary architects in the operations of utilizing colors in architecture. After considering a number of previous studies, the research problem can be stated as follows: (the lack of sufficient detailed theoretical knowledge about colors and their achieved meanings in Islamic architecture). Therefore the goal of research is to (identify the colors used in Islamic architecture and their meanings, along with knowing the correlation between the use of specific colors in specific locations within the Islamic building, and the meanings achieved in each use). In order to achieve the goal of research, the researcher employs an approach which includes: (1Building a theoretical framework which includes identifying the most frequently used colors in Islamic architecture, determine their meanings in the Quran and Islamic tradition, and finding out the color assortments used in Islamic architecture. (2Carrying out an analytical study to complete the information on the utilization of colors in Islamic architecture which includes the use of a set of images of Islamic architecture models to represent the samples of the target study. (3Analyzing the results of the analytical study. The research comes out with some conclusions, like the use of colors in two techniques:1) Representation of the natural environment,2) Counteraction with the environment.
Key words: colors, meaning & semantics, Islamic Architecture
الخلاصة تعد الألوان من العناصر التصميمية المكملة في عملية التصميم المعماري لأي مبنى، فهي تسهم في إظهار الصورة الكلية والنهائية للعمل والتي قصد المصمم إيصالها إلى المتلقي، وقد تميزت العمارة الإسلامية باستخدام متميز للألوان أسهم في تحقيق الوصول إلى نماذج معمارية امتلكت قدرة تعبيرية عالية في إيصال تأويلات مختلفة للمتلقي. ومن أجل تحقق الاستفادة من التراث المعماري والجمالي المتعلق بالألوان في العمارة الإسلامية، يجب معرفة التفاصيل المتعلقة بعملية استخدام الألوان في العمارة الإسلامية لتكون دليلا للمعماريين المعاصرين في عمليات توظيف الألوان في العمارة، وبعد الاطلاع على مجموعة من الدراسات السابقة، تحددت مشكلة البحث بـ (عدم وجود معرفة نظرية كافية بتفاصيل توظيف الألوان في العمارة الإسلامية ومعانيها المتحققة)، فكان هدف البحث(تحديد الألوان المستخدمة في العمارة الإسلامية ومعانيها، ومعرفة ترابط استخدام ألوان محددة ضمن عناصر معينة ضمن المبنى الإسلامي ومعرفة المعاني المتحققة عن كل استخدام).ومن أجل تحقيق هدف البحث اعتمد الباحث منهجاً يتضمن: 1)بناء إطار نظري يضم تحديد معاني ودلالات الألوان في القرآن الكريم والتراث الإسلامي، وتحديد الألوان ومواقع استخدامها في العمارة الإسلامية . 2)القيام بدراسة تحليلية لاستكمال المعلومات المتعلقة بتوظيف الألوان في العمارة الإسلامية تضمنت الاستعانة بمجموعة من صور النماذج المعمارية الإسلامية لتمثل عينات الدراسة العملية.3)تحليل نتائج الدراسة العملية. واختتم البحث بمجموعة من الاستنتاجات كان من أهمها توضيح تقنيتين لاستخدام الألوان في العمارة الإسلامية، هما تقنية التمثيل الطبيعي للبيئة، وتقنية التضاد مع البيئة.الكلمات المفتاحية: الألوان، المعنى والدلالة، العمارة الإسلامية
https://rengj.mosuljournals.com/article_63360_4b7678b9b7e6b7198f0a49eb9c04ea6b.pdf
Key Words
Meaning
Islamic architecture
الكلمات المفتاحية
المعنى والدلالة
العمارة الإسلامية
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2012-12-28
20
6
40
47
10.33899/rengj.2012.63387
63387
Estimate of Penetration Depth of Moist Soils For Mosul City at 6 GHzC-band Microwave Frequency Range
تخمين عمق الاختراق للترب الرطبة لمدينة الموصل عند التردد 6 GHz من حزمة (C) للترددات المايكروية
ManafEzzldien Al-Sabbagh
1
Abstract
Results of an experimental and theoretical programs were presented to determine the impact of soil moisture content and the soil composition on microwave radiometric emission and microwave signal skin depth (Penetration depth), as well as attenuation coefficient within soil surfaces. The measurements are depending on the relative dielectric constant that practically carried out by this research. The measurements have been conducted for three common types of soil in Mosul city (ornamental, cropland, and orchard) at 6GHz (C-band) microwave frequency.
The expected brightness temperatures of these soil samples and the skin depth have been computed. The results show that the observed microwave skin depth is relatively high for ornamental type more than that of cropland and orchard.
Keywords: Moist soil, Penetration depth, Brightness temperature, Complex dielectric constant.
الملخصيقدم هذا البحث النتائج العملية و النظرية لقياسات تأثير المحتوى الرطوبي والمحتوى التركيبي للتربة على الانبعاث المايكروي وعمق الاختراق للإشارة المايكروية (الرادارية) بالإضافة إلى معامل التوهين للنماذج الشائعة من الترب الموجودة في الموصل (المحاصيل، المتنزهات، ألبساتين), وتم القياس عند التردد المايكروي (6 كيكاهرتز) والذي يقع ضمن حزمة (C ). وتمت الحسابات بالاعتماد على ثابت العزل النسبي لنماذج الترب والذي تم قياسه عمليا في البحث.تم إجراء القياسات لكمية الانبعاث الحراري المتوقع من النماذج المستخدمة ضمن الاستقطاب الأفقي و الاستقطاب العمودي فضلا عن قياس عمق الاختراق للإشارة الرادارية، وأظهرت النتائج أن عمق الاختراق للإشارة الرادارية يكون عالي نسبيا لنموذج تربة المتنزهات مقارنة مع نموذجي ترب المحاصيل والبساتين.
https://rengj.mosuljournals.com/article_63387_2f0cd7d11ebd0cc6fc89e214c0cf33a7.pdf
KEYWORDS
penetration depth
Brightness temperature
Complex dielectric constant
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2012-12-28
20
6
48
59
10.33899/rengj.2012.63389
63389
Stress AnalysisoftheAbove-Knee ProsthesisduringGait Cycle
تحلیل الأجهادات لوقب الطرف الصناعی أعلى الرکبة خلال الخطوة الواحدة
Bakr Noori Khudher
1
Abstract In this paper the finite element analysiswas achieved on the above-knee prosthesis to investigate a picture of stress distribution in the socket.Previous works on the prostheses used the symmetry approximationinshape modeling and most of them are all about static loading.The analysisand shape modeling in this work were achieved in high accuracy with theaid of ANSYS 12.1 package software capabilities. Ofthis study, stressanalysis was achieved under dynamic loading at the three main gait cycle;soon after heel strike, foot flat and just before tow off as traditional stagesused in researches. This work lies on the dynamic loading calculated withthe ground reaction forces, dynamic forces, and moments as well as theangular and linear acceleration of foot up to the thigh during the three maingaitcycle. The stress distribution was achieved and it is imported to note that themaximum stress induced in the socket are at the upper brim whereas mostparts of the socket are consi-dered as a low stress region. Key Words: stress, dynamic loading, socket , prosthesis, above knee, finite element
الخلاصةفی هذا البحث تم أجراء عملیة تحلیل العناصر المحددة لوقب الطرف الصناعی أعلى الرکبةلمعرفةخارطة توزیع الأجهادات المتولدة خلال الطرف. أجریت الأعمال السابقة على هذا النوع من الطرفباستخدام الشکل المتماثل کما کان الترکیزکثیرا على حساب الأجهادات بتأثیر الأحمال الساکنة.فی هذه الدراسة کانتعملیة التحلیل ونمذجة شکل الوقب قریبة جدا من الشکل الحقیقی بالاستفادةمن ألإمکانیات الکبیرة لبرنامج(ANSYS12.1). تضمنت الدراسة عملیة تحلیل للأجهاداتبتأثیر الأحمال الحرکیة عندالمراحل الرئیسیة الثلاثة للخطوة وهی مرحلة ماتلی مباشرة ضربالکعب الأرض ومرحلة تسطح القدم والمرحلة التی تسبقبقلیل ابتعاد أصابع القدم عن الأرض وهیمراحل تقلیدیة دأب علیها الباحثون. واعتمدت الدراسة على حساب الحمل الحرکی بحساب قوى ردالفعل الأرضی والقوى والعزوم الحرکیة المصاحبة للتعجیل الخطی والدورانیمن القدم صعودا الىعظم الفخذ عند المراحلالرئیسیة الثلاثة للخطوة. تم الحصول على صورة توزیع الأجهادات علىالمناطق المختلفة للوقب ولوحظ أن قیمها العظمى ترکزت فی منطقة الحافة العلیا فیما تمیزت معظمالمناطق الأخرى بأنها ذات مستویات أجهاد متدنیة
https://rengj.mosuljournals.com/article_63389_94bc2959d65f89a1aba4f2d5524eb3f5.pdf
Key Words
dynamic loading
socket
prosthesis
above knee
finite element
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2012-12-28
20
6
60
69
10.33899/rengj.2012.63391
63391
Stress Analysis of Centrifugal Fan Impellers
تحليل الإجهاد لمروحة طاردة مركزية
Dr. Muhamed H. Abood
1
Ayad A. Ghaidan
2
Mahmood H. Ali
3
Abstract
This paper deals with the determination of stress distribution for a centrifugal fan consists of back sheet, ten airfoil blades and shroud by using Finite element Packaged program (NSTRAN). The results showed that the blade trailing edge and the shroud plate have amaximum VonMises stress which exceeds the yield point of the materials. Thickness effect of each part on the stress distribution in the impeller was determined with fixing the other parts thickness.The result showed that the optimum thickness of the plate is (11mm), for shroud is (9mm) for blade is (3mm), for back sheet plate is (11mm) for shroud stiffener is (3mm). the overall results pointed out that the shroud plate is a critical part and has a large effect on the stress distribution than other parts.
Keywords: Centrifugal Fan, VonMises stress, Finite Element, NASTRAN
الخلاصةتتضمن هذا البحث أيجاد توزيع الاجهادات للدافعة المتكونة من صفيحة خلفية و صفيحة علوية بالإضافةإلى عشرة من ريش الانسيابية الشكل باستخدام برنامج العناصر المحددة (NASTRAN). أظهرت النتائج بأن الاجهادات في مؤخرة الريش عند الصفيحة العلوية قد تجاوزت قيم أجهاد الخضوع للمعادن المستخدمة. و من ثم تم دراسة تأثير سمك كل جزء على توزيع الاجهادات بتثبيت سمك الأجزاءالأخرى لاختيار أفضل سمك لكل جزء, و قد تبين بان أفضل سمك للصفيحة الخلفية هي (11mm) و للصفيحة العلوية (9mm) و للريش (3mm) و لصحيفة التسليح للصحيفة الخلفية (6mm) و لصحيفة التسليح للصحيفة العلوية (3mm). أشارت النتائج الإجماليةإلىأن الصحيفة العلوية هي الجزء الحرج و لها تأثير كبير على توزيع الاجهادات في الأجزاءالأخرىلأنها اقل الأجزاء استنادا .
https://rengj.mosuljournals.com/article_63391_cea77b58c714036e860804ee94194dbf.pdf
KEYWORDS
VonMises stress
finite element
NASTRAN
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2012-12-28
20
6
70
76
10.33899/rengj.2012.63393
63393
Effects of H2SO4 and HCL Concentration on the Corrosion Resistance of Protected Low Carbon Steel
تأثیر ترکیز حامض الکبریتیک وحامض الهیدروکلوریک على مقاومة التآکل للصلب منخفض الکاربون المحمی
Dr.Sami Abualnoun Ajeel
1
Haitham Mohammed Waadulah
2
Dehia AbdAlkader Sultan
3
Astract Investigations were carried out to study the corrosion behavior of unprotected and protected low carbon steel using carburizing and hard chrome plating in different concentrations of H2SO4 and HCL solutions. Weight loss method was used for estimation the corrosion rate in the current study. Theresults show that protected low carbon steels samples by hard chrome platinghad better corrosion resistant (less corrosion rate) than unprotected and carburized low carbon steel samples. Also, the corrosion rate increaseswith increasing acid concentration from (1 to 5)M. for both types of acid used. The corrosion rate of low carbon steel in acid environments indicate that the hydrochloric acidsolution was more corrosive media thanthat of sulphuric acid solutionunderthe same conditions. Keywords:Corrosion rate;Acid environments;Low Carbon Steel;weight loss method.
الخلاصةتم فی هذا البحث دراسة سلوک تآکل الصلب منخفض الکاربونغیر المحمی من التآکل والمحمی من التآکل باستخدام الکربنة والطلاء بالکروم فی تراکیز مختلفةلمحلول حامض الکبریتیک ومحلول حامضالهیدروکلوریک.طریقة فقدان الوزن استخدمت لتقدیر معدل التآکل فی هذه الدراسة.من النتائج التی تم الحصول علیها ، تبین ان نماذج الصلب منخفض الکاربون المحمی من التآکل بطلاء الکروم أعطتأفضل مقاومة للتآکل(اقل معدل تآکل)من نماذج الصلب غیر المحمی ونماذج الصلب المحمی بالکربنة. کما ان معدل التآکل یزداد مع زیادة نسبة ترکیز الحامض من( 1 الى 5 ) مولالی لنوعی المحالیل الحامضیة المستخدمة . وان نتائج معدل التآکل للصلب منخفض الکاربون فی الأوساط الحامضیة تبین بانمحلول حامض الهیدروکلوریک کان وسطاً تآکلیاًأکثرتأثیرا من محلول حامض الکبریتیک تحت نفس ظروفالاختبار.
https://rengj.mosuljournals.com/article_63393_5a36ece1dd482a655c0fbc5275edb5eb.pdf
KEYWORDS
Acid environments
Low Carbon Steel
weight loss method
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2012-12-28
20
6
77
89
10.33899/rengj.2012.63395
63395
Studyof the Effect of Relative Humidity on the Heat Transfer Characteristics for a Fin Exposed to Air at Different Conditions Ziad M. Al-Makhyoul
دراسة تأثير الرطوبة النسبية على خصائص انتقال الحرارة لزعنفة معرضة لهواء في ظروف متغيرة
Ziad M. Al-Makhyoul
1
A study of the effect of relative humidity on the two dimensional heat transfercharacteristics for thetwo types of annular fins of (constant thickness and variable thickness)has been carriedout using finite difference method and grid generation technique of algebraic method to simplify the geometry of fin. The temperature distribution for a fully wet fin and dry fin has been determinedat relative humidity of (0, 50, 75 and 100)%alsofin efficiency, fin effectiveness and heat transferhave been calculated for a range of relative humidity at (10, 20, 30, 40, 50 and 100)% and length of fin from (0.01 to 0.1)m. The effect of the atmospheric pressure was also studied. The study shows that the fin effectiveness and fin efficiency of a fin in the case of fully wet fin are found to be less than those in the dry fin andthe temperature gradient at the tip for a dry fin is greater than that for the wet fin
Key words: Annular fins, relative humidity, heat transfer
الخلاصةان دراسة تاثير الرطوبة النسبية على خصائص انتقال الحرارة بالاتجاهينلنوعين من الزعانف الحلقية(ثابتة السمك ومتغيرة السمك ) قد تمت باستخدام طريقة الفروق المحددة وتقنية توليد الشبكة بالطريقة الجبرية لتبسيط الشكل الهندسي للزعنفة. تم حساب توزيع درجات الحرارة عندما تكون الزعنفة رطبة كلياً وجافة عند قيم رطوبة نسبية (0، 50، 75 و 100)% وكذلك حساب كفاءة الزعنفة وفعالية الزعنفة وانتقال الحرارة لعدد من قيم الرطوبة النسبية عند (10، 20، 30، 50 و 100)% وطول زعنفة من (0.01 الى 0.1) م ،كما تمت دراسة تاثير الضغط الجوي . بينت الدراسة ان كفاءة الزعنفة وفعالية الزعنفة في حالة الزعنفة الرطبة كليا اقل منه عندما تكون الزعنفة جافة وقيم انحدار درجات الحرارة في نهاية الزعنفة في الزعنفة الجافة اكبر منه في الزعنفة الرطبة الكلمات المفتاحية: زعانف حلقية ، الرطوبة النسبية ، انتقال الحرارة
https://rengj.mosuljournals.com/article_63395_819ac960cbb296402097e0071877a151.pdf
Key Words
Relative humidity
heat transfer
الكلمات المفتاحية
الرطوبة النسبية
انتقال الحرارة
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2012-12-28
20
6
90
103
10.33899/rengj.2012.63397
63397
Effect of wick structure geometry on the performance of a heat pipe
تأثیر الشکل الهندسیللفتیلة على أداء أنبوب حراری
Dr.Hussain H.
1
Raqeeb H. Rajab
2
Abstract A mathematical model was set up to find the heat transfer coefficient in a heat pipe with a grooved wick structurehaving axial capillaries of different cross sectionsthroughproducinga considerable capillary pressure forced and hydraulic drag. From this viewpointa model is developed and solved analytically to estimate the heat pipe performance. A different geometry groove shapesin the inside surface ofa heat pipe are designed. From the proposed model, numerical optimization is performed to enhance the thermal performance of the heat pipe for measuring the maximum heat transport rate. The exact pressure drop and the temperature drop calculations were performed using finite element modeling by Ansys program.Also, in the present studycomparison between various geometry groove shapeswith same depth (circular, trapezoidal and rectangular) at constant wall heat flux condition is made including the effect of the groove shapes on the heat transfer characteristics in a turbulent tube flow( Reynolds number range 5000–15000).The analytical result for the maximum heat transport rate wasobtained when the geometry is circular whilethe rectangular grooved pipe is decreased by (20) % in comparison with the circular grooved pipes. Key Words: Heat pipes,wick structure,groove.
الخلاصةنموذج ریاضیتم بناؤه لإیجاد معاملانتقال الحرارة فی أنبوب حراری ذی ترکیبة أخدودیة داخلیةمحوریة مختلفةالأشکال من خلال تأثیر قوى الضغط الشعری والسحب الهیدرولیکی. ومن هذا المنطلق تم تطویر نموذج تحلیلی للحصول علىأقصى معدل انتقال حرارة عند ظروف تشغیلیة مستقرة. أخذت نماذج لإشکال أنابیب الحرارة ذات أخادید داخلیة مختلفة للحصول على أفضل أداء للأنبوب الحراری . تم تنفیذ التحلیل العددی للنموذج الأمثل المقترح من خلال قیاس أعلى معدل لانتقال الحرارة بإیجادالانخفاض الدقیق للضغط ودرجة الحرارة باستخدام برنامج تحلیلی. إضافةإلىأن فی هذه الدراسة تم إجراء مقارنة لمعرفة أفضل جریان متدفق بین هذه الإشکالالهندسیة مختلفة الأخادید الداخلیة عند نفس ارتفاع الأخدود (أخادید دائریة, شبهمنحرف ومستطیلة) فی حالة ثبات الفیض الحراری وعند جریان مضطرب(قیمعدد رینولدز تراوحت بین5000إلى15000) لمعرفة تأثیر شکل هذه الأخادید على خصائص انتقال حرارة.أظهرت النتائج التحلیلیة أن أفضل معدل لانتقال الحرارة عند سطح داخلی مخدد دائریا بینما انخفض عند الأنبوب الحراری ذی الأخادید الداخلیة المستطیلة بنسبة 20% عند مقارنتها بالأنبوب الحراری ذی الأخادید الدائریة.
https://rengj.mosuljournals.com/article_63397_bc15f15ebcfa497c2e4fa0f44b434729.pdf
Key Words
wick structure
groove
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2012-12-28
20
6
104
116
10.33899/rengj.2012.63399
63399
Pipeline Architecture for Clipping Straight Line Segments
معمارية خط أنابيب لتقليم مقاطع خطوط مستقيمة
Dena R. Ibrahim
1
Fakhrulddin H. Ali
2
Abstract
Sometimes, in computer graphics, there is a need to show a part or a piece of a specific picture to study it accurately. For this purpose a window can be used to select the interested part of the picture for display out of other parts. This window is called a clipping window and this process is called a clipping process .On the other hand, clipping is required when a part of a moving image becomes out of the visible zone for display. So the clipping process is one of the important issues in the field of computer graphic specially for real time applications. Therefore a study of the line clipping with respect to a rectangular window while looking to various methods to achieve clipping process in the image space is presented in this paper. In addition to that, performance measurements are conducted and compared. The paper develops a method to perform clipping in the object space in which the line segment is clipped against a viewing volume. Finally, pipelining is adopted to realize clipping algorithm in hardware.
Key Words : Regional Code, Clipping Window , Viewing Pyramid, Pipeline.
الخلاصة في تطبيقات الرسوم المولدة بالحاسوب هناك حاجة لعرض جزء من الصورة الكلية حيث يستخدم شباك القطع لاختيار الجزء المطلوب وإعادة عرضه على الشاشة. يسمى هذا الشباك بشباك التقليم وتسمى العملية بعملية التقليم. من ناحية أخرى التقليم أيضا ضروري ومطلوب عندما يخرج جزء من صورة متحركة خارج نطاق الرؤيا والعرض لذلك التقليم مهم في عملية توليد الصور المتحركة خصوصا عند الأداء في الزمن الحقيقي. بناء على ما تقدم في هذا البحث دراسة لكيفية تقليم قطعة الخط المستقيم بالنسبة لشباك مستطيل مع مقارنة الطرق المختلفة لانجاز ذلك في فضاء الصورة بالإضافة إلى تعزيز ذلك بقياس الأداء ومقارنته. كما تم تطوير عملية التقليم لأدائها في فضاء الشيء حيث يتم تقليم المستقيم بالنسبة إلى حجم الرؤيا. في النهاية تم تبني تقنية خط الأنابيب لتنفيذ التقليم في الكيان المادي .
https://rengj.mosuljournals.com/article_63399_75126d37e5e2a48c89e93ce29040901c.pdf
Key Words
Clipping Window
Viewing Pyramid
Pipeline
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2012-12-28
20
6
117
130
10.33899/rengj.2012.63401
63401
Combined Armature and Field Fuzzy Speed Control of a DC Motor for Efficiency Enhancement
السيطرة الضبابية المزدوجة للمنتج والمجال على سرعة محرك التيار المستمر لتعزيز كفاءته
Ahmed M.Adday
1
Dr.Mazin Z .Othman
2
Abstract
This paper presents the design and implementation of fuzzy logic controller (FLC) to improve the efficiency of a separately excited dc motor .The improvement of motor efficiency is achieved by controlling both armature voltage and field voltage simultaneously which are decided by the FLC. DC-DC converters (chopper Buck) are utilized to control armature voltage and field voltage. Design and MATLAB simulation are presented together with implementation of fuzzy logic controller using microcontroller type(MC9S12DP256B).The results show that the efficiency of the DC motoris clearly increased in light and medium load torques in comparison to the armature fuzzy speed controller.
Key words: speed control of DC motors, fuzzy control, and efficiency enhancement.
تم في هذا البحث تصميم وتنفيذ مسيطر المنطق الضبابي لتحسين كفاءة محرك التيار المستمرذو الإثارة المنفصلة ,وذلك عن طريق التحكم بكل من فولتية المنتج وفولتية المجال مع الزمن آنياً,التي يقررها المسيطر الضبابي المصمم,تم استخدام مغير قدرة التيار المستمر نوع (المغير الخافض)الذي تم اختياره في هذا البحث لعدم الحاجة إلى الفولتية الأكبر من فولتية المصدر ,للتحكم بفولتية المنتج ,ومغير خافض أخر للتحكم بفولتية المجال.الخطوة الأولى هي تصميم المسيطر الضبابي والمنظومة ككل في برنامج (MATLAB),والخطوة الثانية هي تصميم المسيطر الضبابي باستخدام المسيطر الدقيق نوع (MC9S12DP256B) ,وكذلك بناء مكونات المنظومة عمليا,أما بالنسبة للنتائج النظرية والعملية فهي موضحة في هذا البحث التي تظهر تحسن كفاءة المحرك إذا ما قورنت مع السيطرة الضبابية للسرعة بالتحكم بفولتية المنتج فقط
https://rengj.mosuljournals.com/article_63401_793184526800a265855cfbab898ac0f7.pdf
Key Words
fuzzy control
and efficiency enhancement
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2012-12-28
20
6
130
138
10.33899/rengj.2012.63405
63405
Recognition ofBreast CancerUsing Hybrid Method
تمییز سرطان الثدی باستخدام الطریقة الهجینیة
Loay Salim Yahya
1
Abstract In this paper,a computer aided diagnosis [CAD] system has been developed for tumor detection in digital mammography. The system consists of four parts: firstenhance the image,second Feature extraction using six decomposition levels of two dimensional Discrete wavelet transform (2DWT),the features are extracted from regions of interest(ROI),third Reducing the features extracted using two algorithm energy root mean square and mean algorithm of each set of coefficients in each decomposition level, fourth classification of tumor using three layers artificial neural network (ANN) with (19) features is proposed for classifying the marked regions into benign and malignant. Experiments are done on 63 benign tumors and 52 malignant one. The recognition rate of the malignant tumor is (96%) while that of the benign ones is (100%). The result shows that the proposed method can classify the breast tumors effectively when using root mean square algorithm. Keywords: Recognition,Breast Cancer, Artificial Neural Network,root mean square.
الخلاصـــــــــةفی هذا البحث ، تم تطویر نظام للکشف عن الأورام الموجودة فی الصــور الرقمیــة للثدی بمسـاعدة الحاسبة .النظام مکون من أربعة مراحل :الأولىتحسین الصورة, الثانیة استخلاص الخصائص باستعمال ستة مستویات للتحلیل وباستخدام التحویل المویجی المقطع ثنائی الأبعادلاستخلاص الخصائص من منطقة الورم ، الثالثــــة تقلیل حجم الخصائـــــص المسـتخلصة باســــتخدام طریقتین المعدل وحزم الطاقــــــة (جذر متوسط التربیع) لکل مجموعة من العوامل ولکل مســــتوى من مستویات التحلیل ، الرابعــــة تصنیف الـــورم (خبیث أو حمید) باستخدام الشبکة العصبیة الاصطناعیة مکون من ثلاثة طبقات لتصنیف متجه الخواص المحتوی على (19) معامل المستخلص من منطقة الورم . أجریت التجارب على (63) نموذج لأورام حمیدة و(52) نموذج لأورام خبیثة . نسبة التمییز للأورام الخبیثة (96%) بینما للحمیدة (100%) .أظهرت النتائج للطریقة المعروضة کفاءة فی تمییز أورام الثدی عند استعمال خوارزمیة جذر متوسط التربیع .
https://rengj.mosuljournals.com/article_63405_3e907c17abcdd022ecfa447ec7f78cb5.pdf
KEYWORDS
breast cancer
artificial neural network
root mean square
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2012-12-28
20
6
139
153
10.33899/rengj.2012.63409
63409
Effect of Combined Stabilization by Lime and Cement on Hydraulic Properties of Clayey Soil Selected From Mosul Area
دراسة تأثير التثبيت المركب بالنورة والسمنت على بعض الخصائص الهندسية والهيدروليكية لتربة مختارة من مدينة الموصل
Mohammed MukhlifAljobouri
1
Dr. SuhailIdreesKhattab
2
Abstract
This paper is aimed to study some of the hydraulic properties (permeability and water retention) of a stabilized clayey soil selected from Mosul area. The optimum lime stabilization percentage was found to be 4 %. Cement amounts of 6 % and 18 % are needed to achieve a minimum unconfined compressive strength of 1400 and 5600 kParespectively “suggested limits for stabilized soil suitable as a base course”. For the same indicated range of strength, a combination of lime-cement ratios of 1-3 % and 2-9 % respectively were found to be sufficient to achieve this limit.Permeability of natural soil was found to increase with treatment of lime, cement and lime-cement. A maximum increasing in permeability about 17 fold was found using 4 % lime. While the permeability was 1.2 folds as a minimum increase when treating the soil with 18 % cement. The soil-water characteristics curve shows that (S-Shape) curves were maintained for natural and stabilized soil.
الخلاصةيهدف البحث إلى دراسة تأثير بعض الخصائص الهيدروليكية (النفاذية والإحتفاظ بالماء) لتربة طينية مثبتة مختارة من مدينة الموصل. تم إيجاد نسبة التثبيت المثلى للنورةوهي 4 % نورة، كما تم إيجاد نسبة التثبيت المثلى للسمنت التي تحقق الحد الأدنى 14كغم/سم2 والأعلى 56 كغم/سم2 لمقاومة الانضغاط غير المحصور لطبقة الأساس للطرق، وهي 6 %و18 % على التوالي، وكذلك تم إيجاد نسبة التثبيت المثلى لمزيج النورة-السمنت بنفس الطريقة المتبعة في إيجاد النسبة المثلى للسمنت، وقد وجد أن النسبتين 3-1 % و 9-2 % هي النسب المثلى للتثبيت. أظهرت التربة المعاملة بالنورة، السمنت والنورة-السمنت زيادةً في النفاذية عن نفاذية التربة الطبيعية، بغض النظر عن نسبة المواد المضافة. وجد أن الزيادة الأعلى في النفاذية كانت للنماذج المعاملة بنسبة %4نورة بحدود 17 مرة. في حين كانت الزيادة الأقل في النفاذية عند النسبة 18% سمنت حوالي 1.2مرة. حافظت منحنيات خاصية التربة-الماء للتربة المعاملة على الشكل العام أي شكل (S-Shape) ولجميع الحالات المدروسة. كان نمط الترتيب لمنحني خاصية التربة-الماء من ناحية قابلية الاحتفاظ بالماء يزداد مع زيادة نسبة المضافات.
https://rengj.mosuljournals.com/article_63409_ee45b38c7fa67e6f06256ae754827cdf.pdf
eng
College of Engineering, University of Mosul, IRAQ
Al-Rafidain Engineering Journal (AREJ)
1813-0526
2220-1270
2012-12-28
20
6
154
168
10.33899/rengj.2012.63412
63412
Experimental and Finite Element Analysis of Steel-Concrete Composite Beams
التحليل العملي وباستخدام طريقة العناصر المحددة للأعتاب المركبة الحديد– الخرسانة
Dr. Suhaib Yahya Kasim Al-Darzi
1
Inas Mahmood A.H.Al-Juboory
2
Abstract
A new type of perfobond shear connector is suggested, and tested through design and construction of six steel-concrete composite beams separated on three groups formed from standard steel section (W4X13), with total length of 1300mm. The concrete slab connected to steel section by using three types of mechanical shear connectors namely; stud connector and regular circular hole perfobond connectors in addition to newly suggested type of triangular hole perfobond connector. The beams are experimentally tested using two point load beam test to inspect the effects of connector’s type on beam behaviour at yielding and ultimate stages in terms of deflection at mid-span and slip at ends of tested beams. A three dimensional nonlinear finite element model is developed using ANSYS software to simulate beam test up to failure. The results show that, composite beams constructed with newly suggested triangular perfobond connectors developed a strength percentage higher than those with stud connectors, and regular circular perfobond connector. The finite element model validated by comparing with experiments, predicting differences in ultimate resistances of (0.9% to 5.7%) for perfobond connectors and (11.9% to 19.2%) for stud connectors.
Keywords: ANSYS, Connector, Composite, Finite Element, Perfobond, Stud
الخلاصةتم تصميم وتنفيذ ستة أعتاب مركبة حديد–خرسانة مقسمة على ثلاثة مجموعات باستخدام مقطع حديدي قياسي (W4X13) وبطول 1300ملم يرتبط ببلاطة خرسانية باستخدام ثلاثة أنواع من روابط القص. استخدمت روابط القص المسمارية والروابط المثقبة الدائرية الفتحات مع اقتراح روابط مثقبة جديدة ذات فتحات مثلثة الشكل. تم إجراء فحص نقطتي تحميل للأعتاب مختبرياً لدراسة تأثير استخدام أنواع مختلفة من الروابط على مقاومة الأعتاب في مرحلتي الخضوع والفشل. تم أيضا تحري تغاير الهطول في منتصف العتب والانزلاق في نهاية العتب للمجموعات الثلاثة. هذا واشتمل البحث تمثيل الفحص باستخدام نموذج العناصر المحددة ثلاثي الأبعاد باستخدام برنامج ANSYS. وقد وجد من خلال النتائج المستحصلة أن الأعتاب المنفذة باستخدام روابط مثقبة تعطي مقاومة أعلى من تلك للروابط المسمارية، كما أن الروابط المثقبة المثلثة الجديدة تعطي مقاومة أعلى من المثقبة الدائرية. تم تحقيق نتائج نموذج الأجزاء المحددة بمقارنتها بالنتائج العملية ووجدت نسبة اختلاف 0.9% الى 5.7% للروابط المثقبة ونسبة اختلاف 11.9% الى 19.2% للروابط المسمارية.كلمات مفتاحيه: ANSYS، روابط، مثقبة، مركبة، الأجزاء المحددة، مسمارية
https://rengj.mosuljournals.com/article_63412_a5f35595702a0966c8cd44c1df1902a8.pdf
KEYWORDS
Connector
composite
finite element
Perfobond
Stud
ANSYS
كلمات مفتاحيه
روابط
مثقبة
مركبة
الأجزاء المحددة
مسمارية