Authors

Abstract

تحديد الشروط المثلى لإزالة الفلوريد من مياه الشرب باستخدام طريقة
نالكوندا )التخثير والترسيب(
قصي كمال الدين الاحمدي زينب علي زناد
جامعة الموصل الكلية التقنية كركوك
كلية الهندسة- قسم هندسة البيئة قسم هندسة البيئة والتلوث
الملخص
تعد طريقة نالكوندا من الطرق الفعالة في ازالة الفلوريد وخصوصا لتراكيز الفلوريد الاولية القليلة والمتوسطة
المتواجدة في مياه الخام. تم في هذا البحث ايجاد وتحديد الشروط المثلى لإزالة الفلورايد من خلال دراسة العوامل
المؤثرة على كفاءة نزع الفلوريد والمتمثلة ب )تركيز الفلوريد الاولي، الرقم الهيدروجيني، كمية الشب المضافة، الية
التحريك وزمن المزج لعمليتي التلبيد والتخثير، وزمن الترسيب(. اثبتت نتائج البحث ان التركيز الاولي للفلوريد لا يؤثر
بشكل كبير على الكفاءة، حيث بلغت كفاءة الازالة ) 88 %( عند تركيز فلوريد اولي ) 3( ملغرام/ لتر، في حين كانت كفاءة
الازالة مساوية ل ) 88 %( عند تركيز فلوريد اولي ) 01 ( ملغرام/ لتر وعند نفس ظروف القياس. كذلك لوحظ خلال البحث
تقارب )pH( تأثر كفاءة الازالة بمقدار حامضية وقاعدية الوسط، حيث كانت كفاءة الازالة مساوية ل ) 88 %( عند قيمة
مساوية ل ) 4( و) 9( وعلى التوالي )pH( 7(، في حين انخفضت نسبة الازالة الى ) 77 %( و ) 83 %( وعند قيم (
ولنفس ظروف القياس. كما لوحظ خلال البحث تأثر كفاءة الازالة بكل من كمية الشب المضافة، زمن المزج، وزمن
الترسيب. حيث تم الحصول على افضل كفاءة ازالة عند زمن مزج سريع يساوي ) 0 دقيقة( وزمن تلبيد وتخثير يساوي
8 دقيقة(. كذلك وجد انه من الممكن الحصول على كفاءة الازالة نفسها عند زيادة فترة المزج السريع لغاية ) 3 دقيقة( (
ومن ثم الانتقال الى عملية الترسيب مباشرة. واخيرا تم خلال البحث تعيين زمن الترسيب المثالي، حيث تم الحصول على
افضل كفاءة ازالة عند زمن ترسيب يساوي ) 0 ساعة( وعند ظروف القياس المختلفة.
The Optimum Conditions For Fluoride Removal From Drinking
Water Using Nalgonda Method (Flocculation And Sedimentation)
Dr. Kossay K. Al-Ahmady Zainab A. Znad
University of Mosul College of Technology, Kirkuk
College of Engineering, Environmental Eng. Department Environment and Pollution Eng. Department
.
Abstract
The Nalgonda method is one of the effective methods for fluoride removal, especially
with low and medium initial fluoride concentrations. In this research, the ideal
conditions were found through studying the factors that affect the fluoride removal
efficiency (initial fluoride concentration, pH, alum dose, mixing time for flocculation and
coagulation processes, and the sedimentation time). The research results proved that
initial fluoride concentration does not significantly effect the efficiency. As the removal
efficiency amounted to (88%) for the initial fluoride concentration of (3) mg/L. While
the removal efficiency was equal to (86%) for an the initial fluoride concentration of (10)
mg/L. pH value was proved to be effective, as the removal efficiency was equal to (85%)
when the (pH) value is equal to (7), while the removal decreased to (72%) and (63%)
when the (pH) values were equal to (4) and (9) respectively. Alum dose, time of mixing,
and the time of sedimentation were also affecting on the removal efficiency. Best
removal efficiency obtained at the times of mixing and flocculating equal to (1 min) and
(5 min) respectively. Also it was found that it’s possible to get the same removal
efficiency when increasing the period of rapid mixing to (3 min) and then directly move
to the sedimentation process. Finally, the ideal sedimentation time has been set, best
removal efficiency has been achieved a sedimentation time equal to (1 hour) and at the
different measurement conditions.
Keywords: Flouride removal, Drinking water, Nalgonda method, Flocculation, Sedimentation

Keywords