Civil Engineering- Highway and Railway Engineering
- h-index: 10
Prof. Dr. Abdul-Rahim Ibrahim Al-Hadidy was born in Mosul, Iraq, on October 22, 1976. He received the B.Sc. degree in Civil Engineering (July 1998)-University of Mosul, Mosul, Iraq, the MSc. DegreeTransportation Engineering (November 2001)-
Al-Mustansiryia University, Baghdad, Iraq, and the Ph.D. degree in Highway and Railway Engineering (June 2009)-Harbin Institute of Technology, Harbin, China.
He was Professor of Railway and Highway Engineering, Department of Civil Engineering, university of Mosul, Mosul-Iraq. (9/2020-Present), Assistant professor, Department of Civil Engineering, university of Mosul, Mosul-Iraq. (11/2013-Present), Lecture, Department of Civil Engineering, university of Mosul, Mosul-Iraq. (02/2006-11/2013), Assistant Lecturer, Department of Civil Engineering, university of Mosul, Mosul-Iraq. (2/2002-02/2006), Assistant Research Engineer, Highway Research Center, University of, Mosul-Iraq (04/2002-06/2006), Chemical Examinant for Asphaltic, Epoxies, Paints, Sealants, Grouts, and other materials used in civil engineering construction (2/2002-Present), Head of Civil Engineering Dept., University of Mosul (2020-present), Dean of College of Engineering, University of Mosul (2022-present). His research interests include Asphaltic materials, flexible pavement, rigid pavement, polymers, waste materials, materials recycling, and sustainability, Highway and Railway Geometric design, Joint sealant. He is supervisor of more than 8 MSc. And Ph.D. theses in Highway and railway engineering in the University of Mosul, University of Duhok, and Technical college of Eng., Duhok polytechnic university. He is the author of more than 51 papers, 6 books, and 6 patents. CV (Here).
- +61 7 334 67936
- h-index: 51
Prof. Dr. Amin M Abbosh has BSc , MSc and PhD degrees in Electrical Engineering, Grad Cert in Higher Education, and D.Eng. degree in Microwave Engineering. He is now Professor & Leader of the Electromagnetic Innovations team (EMAGIN), The University of Queensland. His main research interests are electromagnetic medical imaging, design & analysis of microwave devices for wideband performance, antennas & radio wave propagation.
- Electromagnetic Medical Imaging
Electromagnetic Medical Imaging Systems including hardware (microwave devices and antennas), applied electromagnetic, computational electromagnetic, signal processing, and artificial intelligence
- Doctor of Engineering, The University of Queensland
- BSc (Electrical Engineering), University of Mosul
- MSc (Electrical Eng/Electronics & Communication), University of Mosul
- PhD in Electrical Engineering (Communication), University of Mosul
- Graduate Certificate in Higher Education, The University of Queensland
Intelligent Control of Transportation Industry
- h-index: 22
Civil Engineering - Transportation
- h-index: 1
worked in the field on projects related to construction, structural, water resources, and transportation engineering in the Kurdistan Region of Iraq, but he was always excited to work in transportation engineering projects. The ultimate reward for me as a transportation engineer is making direct improvements in the lives of other people while facilitating the efficient, safe, and convenient flow for all road users on our transportation network. This passion led him to dive deeper and get an MS and a Ph.D. in civil engineering/transportation engineering and then licensure as a professional engineer (PE) in the same domain.
- h-index: 30
• MSc. in Mechanical Engineering December 1990 from Luleå University of Technology (LTU)
• PhD in Fluid Mechanics 27th February 1996 at LTU
Current and previous employment
• Professor in Fluid Mechanics, LTU since 2004-05
• Chair Professor of Fluid Mechanics, LTU since 2008-07 • Head of Division of Fluid and Experimental Mechanics, LTU since 2011-03
• Adjunct Professor at School of Mechanical and Aerospace Engineering, Gyeongsang National University (GNU), Republic of Korea since 2021-03
• Head of Div. of Fluid Mechanics LTU 0601–1102, • Professor LTU 0405 – 0512,
• Associate Professor LTU 0007 – 0404,
• Assistant Professor Chalmers 9610 – 0006,
• Researcher SICOMP (Now RISE) 9011 – 9609
Hydraulic research, hydraulic engineering
- h-index: 19
|2022 - 2022||Visiting Research Scholar at Deltares (Delft, The Netherlands)|
|2020 -||Assistant Professor for hydraulics, hydrodynamics and hydroinformatics|
|2013 -||Habilitation as private lecturer for the subject area of river engineering and hydroinformatics|
|2009 - 2020||Senior Scientist (BOKU Vienna)|
|2005 - 2009||PostDoc (BOKU Vienna)|
|2005 -||Doctoral thesis defense with honors (PhD equivalent)|
|2001 - 2005||University Assistant (TU Vienna)|
|2000 -||Graduation with honors (M.Sc. equivalent, civil engineering, Univ. Innsbruck)|
|1993 -||Graduation from high-school with distinction|
Control and Computer Engineering- Automatic Control
- +46 760 579 741
- h-index: 7
Asst. Prof. Dr. Khalid Tourkey Atta was born in Baghdad, Iraq, on September 19, 1975. He received the BSc in Electrical Engineering, (1997)-University of Baghdad, College of Engineering, Electrical Engineering Department, Baghdad, Iraq, the MSc in Control and Computer Engineering, (2000)-University of Baghdad, College of Engineering, Electrical Engineering Department, Baghdad, Iraq, and the PhD in Automatic Control, Lule˚a University of Technology, Department of Computer Science, Electrical and Space Engineering, Lule˚a, Sweden (2015).
- +90 505 257 58 94
- h-index: 11
2015 - … : Professor Dr. at Metallurgical and Materials Engineering, AYBU
2011-2015: Assoc. Prof. Dr. at Metallurgical and Materials Engineering, AYBU
2011-2018: Deputy Dean, Faculty of Engineering and Natural Sciences, Ankara Yıldırım Beyazit Univ.
2016 : Substitute Dean, Faculty of Engineering and Natural Sciences, Ankara Yıldırım Beyazit Univ.
2015 - ….: Head of department, Metallurgical and Materials Engineering, Ankara Yıldırım Beyazit Univ.
2006-2011: Assist. Prof. Dr. at Metallurgical and Materials Engineering, Gazi Univ.
2002-2006: Research Assistant at. at Metallurgical and Materials Engineering, Gazi Univ.
2004-2005: Postdoctoral Researcher at Norwegian University of Science and technology,
1999-2002: Res. Assist. at. at National High Magnetic Field Laboratory, Florida, USA,
2016-2018: Member, Board of management, Turkish Standard Institution,
1995 : Visiting researcher, Arizona State University, USA
1994-1999: Research Assistant at. at Metallurgical and Materials Engineering, Gazi Univ.
Electrical Engineering - Electronics
- h-index: 5
Prof. Dr. Hussein Ali Ahmed AL Abdulqader
was graduated from University of Mosul/ Iraq with BSc Degree in Electronics and Communication in 1975. He received his Master degree (DEA) in Electronics and Communication in 1979 and his Doctor of Engineer Degree in Electronics Engineering in 1982, both from Institute National Ploy-technique of Grenoble (INPG)/France.
He was working in the Electrical Department at the University of Mosul from1983 till 1999 as a faculty member teaching undergraduate and postgraduate degree students, from 1999-2000 he was worked in the College of Engineering and Petroleum, Hadramout University in Yemen. From 2000-2008 he worked in the College of Engineering, Philadelphia University in Jordan and he is one of the foundation members of the Communications and Electronics Department at Philadelphia University and he was the head of this department from 2003-2005. Since 2008 till now he is working in the College of Engineering and Architecture, University of Nizwa , Oman , in 2009-2013 he was the head of the Electrical and Computer Engineering and since 2013 till he is the Dean of the College of Engineering and Architecture.
His research interest includes Electronics and Microelectronics Engineering, Communications Circuits Systems, Thin Film Semiconductors Devices and Photovoltaic Solar System Design and Construction. He is a reviewer of many new MSc and Bachelor Programs in Oman. He is the Supervisor of many MSc and PhD thesis, he is the author of more than 45 papers in Journals and Conferences.
He is member of International Computer Science and Engineering (ICSES) and member of International Association of engineering (IAENG)
Digital Signal Processing
- h-index: 4
Prof. Dr. Jassim M. Abdul-Jabbar was born in Basrah, Iraq, on July 25, 1958. He received the B. Sc. degree in Electrical Engineering (1979), the M. Sc. degree in Electrical Engineering (1983), and the Ph.D. degree in Electronic & Communication Engineering (1997); all from Department of Electrical Engineering, University of Basrah, Basrah, Iraq.
He was the Head of Dept. of Computer Engineering, University of Basrah (1998-2002), Dean Asst. – College of Engineering, University of Basrah (2003- 2004) and Head of Dept. of Computer Engineering, University of Mosul (2011- 2018). Since 2018, he is the chairman of the central committee for scientific promotions at the University of Mosul. Since 2009 till now, he is a Professor of Signal and Image processing, Department of Computer Engineering, University of Mosul, Mosul, Iraq. His research interests include analogue and digital signal processing, image processing, multi-dimensional systems, filter banks and wavelets, FPGA-based system design & realization, linear phase 1-D & 2-D FIR & IIR filters and application, wavelet and wavenet techniques for system control and identification, electromagnetic wave theory , modulation and spread spectrum systems, optical systems, array antennas & smart antennas, computer network application improvements, cognitive transceivers, biomedical information and engineering. He is the supervisor of more than 50 M. Sc., and Ph.D. theses in Electrical Engineering, Computer Engineering, Computer science, Mathematics and physics, in the University of Basrah and then in the University of Mosul. He is the author of more than 80 papers.
Environmental Engineering - Hazardous Waste Management
- h-index: 10
Prof. Dr. Shahlaa Esmail Ebrahim was born in Baghdad, Iraq, on August, 12, 1963. She received the B. Sc. degree in Nuclear Engineering (1986), the M. Sc. degree in Civil/ Environmental Engineering (1997), and the Ph.D. degree in Environmental Engineering (2008), the PhD research include 6 months studying at Cardiff University, UK; all from University of Baghdad, College of Engineering, Baghdad, Iraq. She was the Head of Environmental Engineering Department, College of Engineering, University of Baghdad, (2014-2017), Consultant of the Society of Engineering College of Association of Arab Universities (AARU). (2013-2020) , Secretary of Editing Board of the Journal of Engineering Science of the Society of Engineering College of Association of Arab Universities (AARU) (2013-2020). College of Engineering , University of Baghdad. Since 2008 till now, she is a Professor of Hazardous Waste Management, Environmental Engineering, Department, University of Baghdad. She is a Fulbright Alumni Since 2010 where she joined a program of visiting professors to Michigan State University for a period of 3 months. Her research interests include; Manufacturing of nanomaterials for the removal of pollutants, the use of membrane technology for removal of pollutants, the use of Supported and core/shell magnetic nanocomposites for improved photocatalytic microbial inactivation and degradation of pollutants in wastewater, The use of constructed wetland for bioremediation
of pollutants, and Advanced oxidation process for the removal of hazardous pollutants from wastewater. She is the supervisor of more than 50 M. Sc thesis., and Ph.D. desertation in Environmental Engineering in the University of Baghdad, College of Engineering and the University of Sulaymani. She is the author of more than 50 papers.
- h-index: 15
Assist. Prof. Dr. Omar Rafae Alomar received in 2016 the Ph.D. degree in mechanical and thermal engineering from the Institute of Thermal Engineering, TU Freiberg, Germany. From 2005 till date, he is working at the Northern Technical University, Engineering Technical College Mosul. Omar is interested in Multiphase flow, phase change process, porous media, convective heat transfer, CFD, Nanofluids and solar energy. Omar currently works with three projects and these projects are mentioned in his profile in ResearchGate.
Architectural Design Processes
- h-index: 2
Assis Prof. Dr. Dhuha Abdulgani Abdulaziz Al-kazzaz was born in Mosul City, Iraq, in 1968. In 1990, she received her B Sc. Degree in Architecture Engineering, from the University of Mosul, Iraq. In 1999, she had got her MSc. Degree in Architectural Engineering, form the University of Technology in Baghdad , Iraq. In 2011, she had got her PhD in Architecture From the University of Strathclyde in Glasgow, UK.
She worked in the Department of Architecture – University of Mosul as architectural engineer from 1993, as assistant a lecture from 1999 till 2007, as Lecturer from 2007 till 2015, and as Assistant Professor form 2015 till now.
Her research interest includes architectural design processes, digital techniques in architectural design, building information modelling, architecture education. She is the supervisor of nine MSc. Students. She has more than 25 published articles.
- h-index: 1
Assist. Prof. Dr. Saad Zaghlul Saeed Al-Khayat was born in April 1970. He got B.Sc. and M.Sc. in Mechanical Engineering from Al-Nahrain University (Iraq) in 1992 and 1995 respectively. He worked as a supervisor and Maintenance Engineer in Al-Bahrain Mechanical Factory (Iraq). He got Ph.D. in Mechatronics Engineering from South-Russia State Technical University (Russia) in 2010. He occupied many positions at University of Mosul. His researches interests include robotics, analogue and digital signal processing, image processing, filter banks and wavelets, artificial intelligence, conventional and adaptive controller, modern optimization techniques, path planning, and trajectory generation of robots. He is currently an Assistant Professor of Mechatronics Engineering at university of Mosul. He has more than twenty papers on robotics, intelligent controllers, and modern optimization methods. He is the supervisor of robotics laboratory in mechatronics engineering department at Mosul university. He is the supervisor of more than 7 M.Sc. and Ph.D. theses in mechanical and computer engineering. His current position is head of Mechatronics Engineering Department at University of Mosul.
Electronics & Communication Engineering
- h-index: 4
Water Resources Engineering- Hydrology
- h-index: 3
Asst.Prof. Dr. Omar M. A. Mahmood was born in Mosul, Iraq, on January 29, 1981. He received the BSc Irrigation and Drainage Engineering, University of Mosul, Iraq, 2003, MSc Irrigation and Drainage Engineering, University of Mosul, Iraq, 2009, and PhD Engineering Hydrology, College of Engineering, Gaziantep University, Turkey, 2017.
Dr Mahmood Agha is an experienced engineer, specializing in integrated water resources management in Iraq, and the impact of climate change and drought on Iraq region. He divides his time between university lecturing, supervising research theses and engineering consultancy. He is the supervisor of many master's students in the University of Mosul. He is the author of more than 20 papers.
Sheet Metal Forming
- h-index: 2
Asst.Prof. Dr. Alaa Dahham Younis (1972), Bachelor degree in Machinery and Equipment Engineering - 1994 - University of Technology
Msc in Applied Mechanics - 1999 - Technology University
PhD in Production Engineering - 2007 - University of Technology
1- Work as a maintenance engineer at the American Xerox company, Iraq branch (Baghdad), for copying machines for a period of five years.
2-Work as a maintenance engineer and installation for irrigation pumps and diesel engines of all types, Deutz, Perkins, Cummins, and fixed & pivot irrigation devices.
3-Work as an engineer for maintenance, work, and installation of electric generators of all kinds.
4-Work as a maintenance engineer for swimming pools, water pumps, pipe fitting and water filter stations.
Scientific sites: I got the title of assistant lecturer in 2006 and became alecturer after I got my PhD at the end of 2007 and after that I was promoted to the rank of assistant professor in 2019. I was appointed as the managing editor of Al-Rafidain Engineering magazine in 2020.
I have twelve thank you books (University of Mosul, College of Engineering, University of Nineveh and College of Islamic Sciences)
1- Supervision (Master) The number of Master's theses supervised by 2 Master Thesis
2-Research published in scientific journals: - Number of research published in scientific journals is 5 research
3-Conference proceedings research: The number of research papers published in the proceedings of scientific conferences: 2 research papers